Adamat BMW M57 306D1/M57N 306D2 adapter plate for BMW ZF 8HP45/8HP70 (OEM flexplate)

€242,93 Incl. VAT

Adamat BMW M57 306D1/M57N 306D2 adapter plate for BMW ZF 8HP45/8HP70 (OEM flexplate)

15 mm AW7075-T651 adapter plate to connect a BMW M57 306D1 or M57N 306D2 to a BMW ZF 8HP automatic, with bolts for adapter and gearbox. You use the original N57 flexplate and the BMW bolts for flexplate and torque converter, which are required separately. When ordering, you choose whether the plate is anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium adapter plate. This is done externally and adds about 2 weeks to the lead time.

For example the gearbox code of your 8HP (such as GA8HP70), your chassis, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-246 Category: Brand:

Description

Adamat BMW M57 306D1/M57N 306D2 adapter plate for BMW ZF 8HP45/8HP70 (OEM flexplate)

With this M57 8HP adapter plate from Adamat Performance, you mount a BMW M57 306D1 or M57N 306D2 diesel engine to a BMW ZF 8HP eight-speed automatic. The adapter bridges the difference between the older M57 block and the bell housing of the 8HP.

The plate is 15 mm thick and machined from AW7075-T651 aluminium. You use it with the original BMW flexplate of the N57, plus the original BMW bolts for the flexplate and torque converter. These parts are not included in the kit; the BMW numbers are listed below.

This way you keep the M57 in your project and get a modern eight-speed automatic behind it, for example an 8HP70 or 8HP75 from an N57 or an 8HP50Z from a B58.

Key advantages

  • M57 with 8HP automatic: for the M57 306D1 and the M57N 306D2
  • Seven 8HP versions according to Adamat, from the 8HP45Z to the 8HP76Z
  • Adapter plate made of 15 mm AW7075-T651, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Works with the original N57 flexplate from BMW, so no special flywheel needed
  • Bolts for adapter and gearbox included
  • Clear parts list: the required BMW parts are listed with their OEM number
  • Installation manual available as a PDF from Adamat

Suitable for

Engine: BMW M57 306D1 and M57N 306D2 (E46)

ZF 8HPGearbox codeFrom BMW with engine
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50ZGA8HP50ZB58B30
8HP76ZGA8HP76ZS58B30
8HP75ZGA8HP75ZB57B30
8HP51ZGA8HP51ZB48B20, B46B20
8HP45ZGA8HP45ZB47C20, B47D20

Required and not included (original BMW parts):

PartQuantityBMW OEM number
Flexplate of the N57/N57N111228506670
Flexplate bolts (flywheel bolts)811227797966
8HP torque converter bolts624407561393

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-M57D1-D2-8HP-FP
  • Engine: BMW M57 306D1 and M57N 306D2
  • Gearbox: BMW ZF 8HP (see table)
  • Material: AW7075-T651 aluminium
  • Adapter plate thickness: 15 mm
  • Included: adapter plate, bolts for adapter and gearbox
  • Not included: N57 flexplate, flexplate bolts and torque converter bolts (see table)
  • Manual: installation manual as a PDF

Installation and delivery

The original N57 flexplate goes on the M57 crankshaft with the BMW bolts. You screw the adapter plate onto the block, after which the 8HP goes onto the adapter with the supplied bolts. You fasten the torque converter with the original BMW converter bolts.

When ordering, you choose whether the adapter plate is anodised. In the note field you enter, for example, the gearbox code of your 8HP, your chassis or a different engine tilt. Adamat makes the plate to order. The lead time is 5 to 7 weeks, about 2 weeks longer with anodising.

One 15 mm plate between the M57 and the 8HP, and you source the rest as original BMW parts using the numbers from the list.

Why choose this M57 8HP adapter plate?

Because the adapter works with the original N57 flexplate and BMW bolts, you do not need a special flywheel and you stick with familiar parts. Adamat lists all the required BMW numbers, so you know exactly what you need to order. If you would rather have everything in one box, Adamat also offers a complete M57 kit for the 8HP.

Frequently asked questions

Which parts do I need in addition to the M57 8HP adapter plate?

With the M57 8HP adapter plate you need the original N57 flexplate (BMW 11228506670), 8 flexplate bolts (BMW 11227797966) and 6 torque converter bolts (BMW 24407561393). These are not included in the kit.

Does this plate fit the M57N2 306D3, 306D4 or 306D5?

No, this plate is for the M57 306D1 and the M57N 306D2. Adamat has a separate adapter plate for the 306D3, 306D4 and 306D5.

What do I choose when ordering?

You choose whether the plate is anodised (externally, about 2 weeks extra). In the note field you can pass on your gearbox code, chassis or a different engine tilt.

What is the lead time?

Adamat makes the plate to order: allow 5 to 7 weeks. Anodising adds about 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight6 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M57 306D1/M57N 306D2 adapter plate for BMW ZF 8HP45/8HP70 (OEM flexplate)”
EN

Your Shopping cart

Close