Hydraulic Handbrake Cylinder Lanos 0.625 inch

€61,98 Incl. VAT

Hydraulic Handbrake Cylinder Lanos 0.625 inch

Lanos-type master cylinder for hydraulic handbrakes, with a piston diameter of 0.625 inch (15.9 mm), M8 thread and a fitting for a 10 mm rubber hose. Can be included in the existing brake system or used for a separate extra circuit. Fits all handbrakes in our range with a Lanos cylinder.

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: 0089 Category:

Description

Hydraulic Handbrake Cylinder Lanos 0.625 inch

This hydraulic handbrake cylinder is a Lanos-type master cylinder with a piston diameter of 0.625 inch (15.9 mm). It is the cylinder you fit to a hydraulic handbrake. You use it to replace a worn unit, or to build a hydraulic handbrake yourself.

With the connection on the cylinder, you can include it in an existing brake system or use it to create a separate, additional brake circuit with its own brake caliper. It fits all hydraulic handbrakes in our range that work with a Lanos cylinder.

Key benefits of this hydraulic handbrake cylinder

  • Well-known Lanos type, widely used on hydraulic handbrakes
  • Piston diameter 0.625 inch (15.9 mm)
  • M8 thread
  • Fitting for a 10 mm rubber hose
  • Can be included in the existing brake system or used for a separate extra circuit
  • Fits all handbrakes in our range with a Lanos cylinder
  • Light: 0.45 kg

Suitable for

Hydraulic handbrakes with a Lanos cylinder

  • All hydraulic handbrakes in our range that use a Lanos master cylinder
  • Building your own hydraulic handbrake for drift or rally
  • Replacing a worn or leaking Lanos cylinder

Technical specifications

  • Item number: 0089
  • Type: master cylinder, Lanos type
  • Piston diameter: 0.625 inch (15.9 mm)
  • Thread: M8
  • Feed: fitting for a 10 mm rubber hose
  • Weight: 0.45 kg
  • Available separately: complete hydraulic handbrakes and adapters for extra calipers

Installation and delivery

The hydraulic handbrake cylinder is attached to the handbrake by its flange. The pushrod with clevis goes to the lever. Connect the feed with a 10 mm rubber hose to a reservoir, and the outlet via a brake line to the rear brake circuit or to an extra caliper.

Work neatly and cleanly: dirt in a brake system is never good. Use the correct brake fluid, bleed the entire circuit carefully and check all connections for leaks. Test that everything works in a closed-off area first, before you go on track.

You will find more cylinders in our hydraulic brake cylinders category. If you are looking for a complete handbrake with this cylinder, take a look at the hydraulic handbrake with reversed Lanos cylinder.

The Lanos cylinder is the workhorse among handbrake cylinders: simple, common and easy to replace.

Why choose this hydraulic handbrake cylinder?

A handbrake cylinder takes a lot of punishment in a drift car. After many runs a seal can start to leak, and then you want to be able to replace the cylinder quickly and without hassle. This hydraulic handbrake cylinder fits directly on the handbrakes in our range that use this type. So with one replacement part, your handbrake is back in order.

Frequently asked questions

What is the piston diameter?

The hydraulic handbrake cylinder has a 0.625 inch piston, or 15.9 mm.

Does this cylinder fit my handbrake?

It fits all hydraulic handbrakes in our range that work with a Lanos cylinder.

Which hose do I need for the feed?

A 10 mm rubber hose.

Can I build a separate brake circuit with it?

Yes. With this hydraulic handbrake cylinder you can create an extra circuit with its own brake caliper. Adapters for extra calipers are available separately.

How can I tell that my cylinder needs replacing?

A handbrake that has to be pulled further and further, brake fluid around the pushrod or a lever that feels soft after bleeding are typical signs. Replace the cylinder before it fails completely during a run.

Is a reservoir included?

No reservoir is mentioned for this cylinder. Assume that you need one separately, or contact us.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1,90 kg

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Handbrake Cylinder Lanos 0.625 inch”
EN

Your Shopping cart

Close