Shop

Description

Motorsport Quick Release Body Fasteners, Set of 2, Race/Rally/Drift

With these motorsport quick release body fasteners you secure the bonnet, bumper, tailgate or other panels with a pin and locking ring. In a few seconds you remove the part and put it back again. That is exactly what you want in the pits or between two drift runs.

The fasteners are intended for motorsport such as drifting, rallying and circuit work, where body parts often have to come off. They are supplied as a set of two, with the screws and nuts you need for fitting.

Key benefits of these quick release body fasteners

• For the bonnet, bumper, tailgate and other body parts
• Quick fitting and removal of panels
• Housing made of durable plastic
• Metal parts zinc-plated against rust
• Sleek black finish
• Set of 2 including screws and nuts
• Light: 0.2 kg for the whole set

Suitable for

Universal, for race, rally and drift cars

• Drift cars where bumpers and bonnets often have to come off
• Rally and circuit cars
• Lightweight bonnets and boot lids without an original catch

Technical specifications

• Item number: 0091
• Type: quick release fastener with a pin (pin fastener) for body parts
• Material: durable plastic, metal parts zinc-plated
• Colour: black
• Contents: 2 fasteners with screws and nuts
• Weight: 0.2 kg

Installation and delivery

A motorsport quick release body fastener sits on top of the panel, and the pin comes up from below through a hole in the bonnet or bumper. First work out the position: the pin must sit directly below the hole and the panel must line up properly. Drill the holes, secure the fastener with the supplied screws and nuts, and adjust the height of the pin. Then push the locking pin through the pin and close the ring.

Check after the first drive that everything is still secure. On a heavy bonnet, preferably use two fasteners per panel so that the forces are spread evenly.

You will find more exterior parts in our quick release body fasteners category. Also take a look at our merchandise and accessories.

Bumper off, bumper on: with two pins you are done in seconds.

Why choose these motorsport quick release body fasteners?

In motorsport, a bumper or bonnet often has to come off for a moment: for a repair, a check under the bonnet or after a tap against the wall. With screws, that takes too long. These motorsport body fasteners work with a pin and locking ring, are light and do not rust quickly thanks to the zinc-plated metal parts. You get everything you need to fit them straight away.

On a lightweight bonnet or boot lid made of plastic or carbon, where the original catch has often gone, these fasteners also hold the panel in place. That way the bonnet stays neatly closed, even at high speed and on bumpy surfaces.

Frequently asked questions

How many fasteners are in the set?

The set of motorsport quick release body fasteners contains two fasteners, with the screws and nuts for fitting.

What can I use them for?

For the bonnet, bumper, tailgate and other body parts.

What material are they made of?

Durable plastic, with zinc-plated metal parts.

Are they suitable for every car?

The motorsport quick release body fasteners are universal. You do need a spot where the pin can be mounted firmly under the panel.

What is the ring on the pin for?

The locking pin with ring secures the pin, so the panel cannot come loose. Pull the locking pin out and you can remove the panel straight away.

Do I have to drill into my bonnet?

Yes, you need to drill holes in the panel for the mounting and for the pin.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.