AST Bolt-in Roll Cage BMW Z3 Roadster V2

€1.316,83 Incl. VAT

AST Bolt-in Roll Cage BMW Z3 Roadster V2

Full roll cage for the open BMW Z3 Roadster, in which the V1 basic structure is extended with front reinforcement bars to the bulkhead. Six bolting points on six welded foot plates, E355 steel in 45 and 40 mm and a fit based on a laser scan. Supplied unpainted with connecting sleeves and complete mounting hardware; there is no version for the Z3 Coupé. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN04971 Category: Brand:

Description

AST Bolt-in Roll Cage BMW Z3 Roadster V2

The AST Bolt-in Roll Cage BMW Z3 Roadster V2 is a full roll cage for the BMW Z3 with 2-door roadster bodywork. This Bolt-in Z3 Roadster V2 builds on the basic cage and adds front reinforcement bars to the bulkhead.

The cage is designed and built by AST Roll Cages in Spain for drivers who want to make their open Z3 more rigid and want structure not only at the rear but also at the front of the car.

Key benefits

  • Front reinforcement bars to the bulkhead, tying the front of the bodyshell to the main hoop.
  • Noticeably more rigid cabin than with the V1, something you feel especially in an open car through fast sequences of corners.
  • Six bolting points on six 3 mm steel foot plates welded to the bodyshell.
  • Can be dismantled into sections via connecting sleeves, handy for transport and for fitting through the open roof.
  • E355 steel: 45 mm main hoop, 40 mm for the rest of the structure.
  • Exact fit thanks to a laser scan of the Z3 Roadster and a 3D design for each car.
  • Unpainted, ready to be powder-coated or painted in your own colour.

Suitable for

BMW Z3 (E37), 2-door Roadster

  • BMW Z3 Roadster, the open two-seater built from 1995 to 2002
  • Type: full roll cage, version V2
  • Drifting, track use and rallying
  • Not suitable for the BMW Z3 Coupé. AST does not offer a roll cage for the closed Z3 Coupé; this cage is designed around the open body of the Roadster and does not fit the coupé.

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN04971
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: X design
  • Roof compatibility: suitable for the original hardtop
  • Type: full roll cage, bolted to foot plates welded to the bodyshell
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 6 bolting points on 6 foot plates welded to the bodyshell
  • Weight: 210 kg (manufacturer’s figure)
  • Finish: welded and unpainted, split into sections via connecting sleeves
  • Included: welded structure, connecting sleeves, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. The foot plates are welded to the bodyshell and the cage sections are then bolted onto them; bear in mind that the front bars run along the dashboard, so plan the interior work in advance.

With the front bars to the bulkhead, the V2 turns the Z3 Roadster from an open car with a hoop into a car with a continuous structure.

Why choose this Bolt-in Z3 Roadster V2 roll cage?

A roadster lacks the torsional rigidity of a closed body, and that is exactly where the step from V1 to V2 helps. AST scans the bodyshell with laser scanners and designs the cage in 3D, so that the front bars run neatly along the interior and end at strong points. The cage is intended for track and competition use; check the regulations of your own organiser before you enter.

Frequently asked questions

What is the difference from the V1?

The Bolt-in Z3 Roadster V2 has the same main hoop with backstays as the V1, but adds two front reinforcement bars to the bulkhead. This means the cage works over the full length of the cabin instead of only behind the seats.

Does this roll cage also fit a BMW Z3 Coupé?

No. AST does not offer a roll cage for the Z3 Coupé. This cage is designed around the open body of the Roadster and does not fit the closed coupé.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight210 kg
Car make

BMW

Model

Z3

Reviews

There are no reviews yet.

Be the first to review “AST Bolt-in Roll Cage BMW Z3 Roadster V2”
EN

Your Shopping cart

Close