Shop

Description

AST Multipoint Weld-in Roll Cage BMW E34 Sedan V5

The AST Multipoint weld-in roll cage V5 for the BMW E34 saloon is a full roll cage for the BMW 5 Series E34 with 4-door saloon bodywork. This Multipoint E34 Saloon V5 is the highest specification level in the range and comes with the complete set of bars.

The cage is designed and built by AST Roll Cages in Spain, for drivers who want to build up their E34 completely in one go, without having extra tubes welded in later.

Key benefits

• Complete set of bars, the most AST offers for this model in its multipoint range.
• Door bars, front reinforcement bars, diagonal brace and harness bar are all included.
• Ten welded mounting points on the bodyshell, more than on a standard weld-in cage.
• Maximum torsional rigidity for a car as large and heavy as the E34.
• E355 steel, main hoop 45 mm and rest of the structure 40 mm.
• Gussets and reinforcement plates in 3 mm steel, custom-designed for each car.
• Unpainted weld-in kit with all bolts, washers and nuts included.

Suitable for

BMW 5 Series E34, 4-door saloon

• BMW 5 Series E34 4-door saloon
• Type: multipoint weld-in roll cage, version V5
• Drifting, track use and rallying

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN00715
• Sunroof: for roofs without a sunroof
• Headlining: for roofs without headlining
• Rear anchorage: in the rear suspension area
• Rear structure layout: X design
• Type: full roll cage, multipoint weld-in (permanent)
• Main hoop: E355 steel, 45 mm diameter
• Secondary structure: E355 steel, 40 mm diameter
• Foot plates: 3 mm steel, custom-designed for each car
• Mounting: 10 welded mounting points on the bodyshell
• Weight: 71 kg (manufacturer’s figure)
• Finish: unpainted weld-in kit
• Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; standard delivery time is 15 to 35 working days. AST digitises the bodyshell with laser scanners and designs the cage in 3D so that it fits your car exactly. Expect a stripped interior: with the complete set of bars, the trim has to come out anyway before the first weld is laid.

Choose the complete set of bars and your car never has to go back to the welding bay; the E34 is finished in one go.

Why choose this Multipoint E34 Saloon V5 roll cage?

Welding extra tubes into a car that has already been painted is expensive and messy. With the highest specification level, you do the job once and immediately get the maximum rigidity and protection that AST designs for the E34. Especially on a heavy saloon that spends many hours on track, that pays for itself.

Frequently asked questions

What makes the V5 complete?

The Multipoint E34 Saloon V5 combines the door bars, the front reinforcement bars to the bulkhead and the additional diagonal brace and harness bar in a single structure with ten welded mounting points. There is no heavier multipoint version above it.

How much of the interior can I keep?

With the complete set of bars, the car is in practice a stripped-out race car; the cage is supplied unpainted and the trim has to come out to reach all the welded mounting points.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.