AST Multipoint Weld-in Roll Cage BMW E46 Touring V5

€1.426,02 Incl. VAT

AST Multipoint Weld-in Roll Cage BMW E46 Touring V5

The most comprehensively equipped full roll cage for the BMW E46 Touring: the complete set of bars from AST Roll Cages, welded to the bodyshell at ten points. Main hoop with backstays, front reinforcement bars, door bars, diagonal and harness bar are all included. E355 steel, unpainted weld-in kit with gussets and mounting hardware. Delivery time 15 to 35 working days.

Available on back-order|Estimated delivery time: 15 tot 35 werkdagen

SKU: CMBN06732 Category: Brand:

Description

AST Multipoint Weld-in Roll Cage BMW E46 Touring V5

The AST Multipoint Weld-in Roll Cage BMW E46 Touring V5 is a full roll cage for the BMW E46 with five-door Touring bodywork. This Multipoint E46 Touring V5 is the most comprehensive specification in the range: the complete set of bars, welded to the bodyshell at ten points.

The cage is designed and built by AST Roll Cages in Spain, for drivers who don’t want to add anything later and want to build up their E46 Touring in the highest specification straight away.

Key benefits

  • Complete set of bars bringing together everything from the V1 to the V4, from the main hoop with backstays to the harness bar.
  • Maximum rigidity within this range, because every bar adds another triangle to the structure.
  • Ten welded mounting points on the bodyshell instead of the eight of a standard weld-in cage.
  • E355 steel, 45 mm main hoop and 40 mm for the rest of the structure.
  • No more adding on later, because you start at the highest level and never have to cut anything open afterwards.
  • Gussets and reinforcement plates keep the panelwork intact under the higher loads.
  • Unpainted weld-in kit with bolts, washers, nuts, documentation, fitting instructions and a sticker set.

Suitable for

BMW E46, 5-door Touring

  • BMW E46 Touring (five-door body)
  • Type: multipoint weld-in roll cage, version V5
  • Drifting, track use and rallying

Technical specifications

  • Manufacturer: AST Roll Cages
  • Manufacturer part number: CMBN06732
  • Sunroof: for roofs without a sunroof
  • Headlining: for roofs without headlining
  • Rear anchorage: in the rear suspension area
  • Rear structure layout: V design
  • Type: full roll cage, multipoint weld-in (permanent)
  • Main hoop: E355 steel, 45 mm diameter
  • Secondary structure: E355 steel, 40 mm diameter
  • Foot plates: 3 mm steel, custom-designed for each car
  • Mounting: 10 welded mounting points on the bodyshell
  • Weight: 71 kg (manufacturer’s figure)
  • Finish: unpainted weld-in kit
  • Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set

Fitting and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. Expect the longest fitting time of the whole range: there are more tubes to fit and more welds to lay, so plan for an experienced welder and enough workshop time.

If you want to build up your E46 Touring properly in one go, choose the V5: every bar in the range in one package, on ten welded mounting points on the bodyshell.

Why choose this Multipoint E46 Touring V5 roll cage?

AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly. With this many tubes, that really matters, because every bar has to fit past the others without anything having to be trimmed. For competition use, it remains your own responsibility to check the regulations of your organiser.

Frequently asked questions

What does the V5 have that the V4 doesn’t?

The Multipoint E46 Touring V5 is the complete set of bars and therefore the most comprehensive specification in this range. Everything from the lower versions is included, and the structure is developed further than on the V4.

What is supplied and what do I have to do myself?

You receive an unpainted weld-in kit with gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set. You have the welding-in and painting done at your own workshop.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight71 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “AST Multipoint Weld-in Roll Cage BMW E46 Touring V5”
EN

Your Shopping cart

Close