Description
AST Weld-in Roll Cage BMW E30 Coupé AWD V1
The AST Weld-in Roll Cage BMW E30 Coupé AWD V1 is a full roll cage for the BMW E30 with 2-door coupé bodywork. This Weld-in E30 Coupé AWD V1 is made for the all-wheel-drive E30, the 325iX, and does not fit the rear-wheel-drive E30; the floor and transmission tunnel of the 325iX are different, so check beforehand which drivetrain your car has. The V1 is the base cage with the main hoop and braces, permanently welded in at eight points.
The cage is designed and built by AST Roll Cages in Spain, for 325iX drivers who are converting their car into a drift or track car and want to start with an affordable, solid base structure.
Key benefits
- Base structure that combines the main hoop and braces into a rigid frame behind the driver.
- Eight welded mounting points spread the forces across the bodyshell rather than over a handful of bolt holes.
- Specific to all-wheel drive: the cage follows the floor of the 325iX and takes that bodyshell into account.
- E355 steel with a 45 mm main hoop and the rest of the structure in 40 mm.
- Lightweight build of 71 kg (manufacturer’s figure) for the complete weld-in kit.
- Supplied unpainted, so that after welding you decide on the surface preparation and colour yourself.
- Complete kit with gussets, reinforcement plates, mounting hardware and documentation.
- Available with anchorage in the rear suspension area or at the wheel arch, which you choose when ordering
Suitable for
BMW E30 3 Series, 2-door coupé with all-wheel drive (325iX)
- BMW E30 3 Series 2-door Coupé
- Only the all-wheel-drive E30 (325iX); this cage does not fit the rear-wheel-drive E30
- Type: weld-in roll cage, version V1
- Drifting, track use and rallying
Technical specifications
- Manufacturer: AST Roll Cages
- Manufacturer part number: CMBN05568
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Type: full roll cage, weld-in (permanent)
- Main hoop: E355 steel, 45 mm diameter
- Secondary structure: E355 steel, 40 mm diameter
- Foot plates: 3 mm steel, custom-designed for each car
- Mounting: 8 welded mounting points on the bodyshell
- Weight: 71 kg (manufacturer’s figure)
- Finish: unpainted weld-in kit
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and sticker set
Fitting and delivery
The cage is built to order; the standard delivery time is 15 to 35 working days. Welding it in is permanent work and should be carried out by a professional. AST digitises the bodyshell with laser scanners and designs the cage in 3D, so that it fits your car exactly.
The V1 is the shortest route to a fully welded-in main hoop in a 325iX, without bars you do not need yet.
Why choose this Weld-in E30 Coupé AWD V1 roll cage?
A welded-in cage becomes part of the bodyshell, and you notice that straight away in the car’s rigidity. The V1 gives you that gain at the lowest entry price in the range, with the same steel grade and the same laser-scanned custom fit as the heavier versions. If you want more bars later on, deliberately choose a higher version number when you buy, because adding to a welded cage is no small job.
Frequently asked questions
Does this roll cage also fit a rear-wheel-drive E30?
No. The Weld-in E30 Coupé AWD V1 is designed exclusively for the all-wheel-drive E30, the 325iX. That car’s bodyshell differs from the rear-wheel-drive E30 in the floor and around the transmission tunnel, so the welded mounting points and foot plates would not line up. If you drive a rear-wheel-drive E30, choose the RWD version.
What exactly will I receive?
You receive an unpainted weld-in kit with the tubes, gussets and reinforcement plates, bolts, washers and nuts, documentation, fitting instructions and a sticker set. You can do the painting and welding yourself or have them carried out by a specialist company.
Where is the roll cage anchored at the rear?
You specify this yourself when ordering. You choose between anchorage in the rear suspension area and anchorage at the wheel arch, and AST builds the cage accordingly.
What is the delivery time?
The standard delivery time for this roll cage is 15 to 35 working days.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.