Shop

Description

AST Multipoint Weld-in Roll Cage Nissan Skyline R33 Coupé V1

The AST Multipoint Weld-in Roll Cage Nissan Skyline R33 Coupé V1 is a full roll cage for the Nissan Skyline R33 with two-door coupé body, welded to the body at ten points. This Multipoint Roll Cage R33 V1 is supplied as a welding kit and welded into one unit in the car.

The difference with the standard weld-in range lies in the anchoring: ten weld points instead of eight. The extra points spread the forces even better over the body and make the connection between cage and shell stiffer. The V1 is the entry to this range.

Key benefits

• Ten weld points: two more than the standard weld-in range.
• Better force distribution: more anchoring means less load per point.
• Anchored up to the wheel arch: the rear stays run to the wheel arch.
• X-shaped rear structure: the rear is built as an X for extra stiffness.
• Gussets included: to reinforce the joints.
• E355 steel: 45 mm diameter main hoop, 40 mm for the rest of the structure.
• Custom base plates: 3 mm thick steel, designed per car rather than universal.
• Exact fit: the body is digitised with laser scanners before the cage is drawn in 3D.
• Complete kit: supplied unpainted with fixings, documentation, installation manual, sticker set and welding test sample.

Fits

Nissan Skyline R33, 2-door Coupé

• Nissan Skyline R33 Coupé, including GTS25t and GT-R
• Version: full roll cage, multipoint weld-in, V1
• Drift, circuit use, track days and competition

The R33 exists as a coupé and as a four-door sedan. This cage is designed for the two-door coupé and does not fit the sedan.

Technical specifications

• Manufacturer: AST Roll Cages
• Manufacturer part number: CMBN07061
• Sunroof: suitable for a roof without sunroof
• Headlining: suitable for a roof without headlining
• Rear anchoring: up to the wheel arch
• Rear structure shape: X design
• Type: full roll cage, multipoint weld-in
• Main hoop: E355 steel, 45 mm diameter
• Other structure: E355 steel, 40 mm diameter
• Base plates: 3 mm steel, designed per car
• Mounting: 10 weld points on the body
• Weight: 210 kg
• Finish: welding kit, unpainted
• Included: welding kit, gussets, reinforcement plates, bolts, washers and nuts, documentation, installation manual, sticker set and welding test sample

Installation and delivery

The cage is built to order; the standard delivery time is 15 to 35 working days. It comes as a welding kit and is welded into one unit in the car. Work from the back to the front: first the main hoop and the ten-point anchoring, then the front bars. Leave the welding to someone with experience in roll cages and use the included welding test sample to check the settings beforehand. On a R33 of this age, check beforehand that the mounting areas are free of rust: welding onto corroded panels gives a cage that will not do its job in a crash. This cage is intended for circuit and competition use; check the regulations of your own motorsport organisation beforehand.

Ten weld points instead of eight: the same basis, but anchored more firmly in the body.

Why choose this Multipoint Roll Cage R33 V1?

For anyone who wants a weld-in cage with the strongest possible connection to the body, the multipoint range is the logical choice. The V1 gives you that ten-point anchoring as a basis, without the extra tubing of the higher versions.

Frequently asked questions

What is the difference with the standard Weld-in V1?

The Multipoint Roll Cage R33 V1 is welded in on ten points instead of eight. That spreads the forces better over the body.

Can I weld the cage in myself?

Only if you have experience welding roll cages. A poor weld takes the strength out of the structure. If in doubt, leave it to a specialist.

Does this cage also fit an R33 sedan?

No. This cage is designed for the two-door coupé. The four-door sedan has a different rear body structure.

Does it fit a GT-R?

Yes, as long as it is an R33 coupé. The cage sits in the interior and has nothing to do with the four-wheel drive of the GT-R.

What is the delivery time?

The standard delivery time for this roll cage is 15 to 35 working days, because AST builds every cage to order.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.