BMW E46 Control Arm Mount Reinforcement Rear

€41,31 Incl. VAT

BMW E46 Control Arm Mount Reinforcement Rear

Weld-in kit to repair and strengthen the mounting of the rear control arms of the BMW E46. Made of 3 mm thick S355 steel, laser-cut. Best fitted during a build or a repair of the rear suspension.

4 in stock (can be backordered)|Estimated delivery time: 1 to 2 working days

Description

BMW E46 Control Arm Mount Reinforcement Rear

With this E46 control arm mount reinforcement you repair and strengthen the mounting of the rear control arms to the body of the BMW E46. The E46 is a widely used base for motorsport projects in all kinds of disciplines, and it is precisely in drifting and circuit work that these mounting points take a lot of punishment.

The set is intended to repair a damaged mount and to prevent damage. Welding it in is easiest during a build or when you are working on the rear suspension anyway. Especially on an E46 with stiffer suspension, a limited-slip differential or a lot of power, it is wise to tackle this spot before small cracks appear.

Key benefits of this E46 control arm mount reinforcement

  • Repairs a damaged rear control arm mount
  • Prevents damage to the mount under heavy use
  • Made of 3 mm thick S355 steel
  • Laser-cut for an accurate fit
  • Weld-in kit, ideal during a build or a repair of the rear suspension
  • Weight: 0.54 kg

Suitable for

BMW 3 Series E46

  • BMW E46, mounting of the rear control arms

Technical specifications

  • Item number: 0057
  • Application: repair and reinforcement of the rear control arm mount
  • Material: S355 steel
  • Thickness: 3 mm
  • Production: laser-cut
  • Fitting: weld in
  • Weight: 0.54 kg

Installation and delivery

The E46 control arm mount reinforcement is welded in. The best moment for this is during a build or a repair of the rear suspension, because the control arm is off anyway and you can get to the mounting points easily.

Clean the sheet metal around the mount thoroughly back to bare metal before welding, and remove sealant, underbody protection and any rust beforehand. Weld in short sections to limit distortion and treat everything properly against rust again after welding. If the mount is already cracked, first assess how extensive the damage is. Welding on the body is a job for an experienced body builder or welder.

You will find more parts to make your body stronger in our chassis and subframe reinforcements category. For the E46 there is also a reinforcement for the rear control arm itself.

A strong control arm mount keeps the rear axle of your E46 exactly where it belongs.

Why choose this E46 control arm mount reinforcement?

A torn-out control arm mount is an annoying and time-consuming repair. With these ready-made parts made of 3 mm steel, you do not have to draw, cut and bend sheet metal yourself. You repair the mount neatly and make it stronger than the original, so that your E46 is ready for drifting and circuit work. Combine the set with the reinforcement for the control arms themselves, and you have made the rear axle strong in one go.

Frequently asked questions

Does the reinforcement have to be welded?

Yes, it is a weld-in kit that you weld onto the body.

When do I weld in the E46 control arm mount reinforcement?

Preferably during a build or a repair of the rear suspension.

Can I repair a cracked mount with it?

Yes. The set is intended to repair the mount and to prevent damage.

What material is the set made of?

3 mm thick S355 steel, laser-cut.

How do I recognise damage to the control arm mount?

Look under the car at the sheet metal around the mounting points of the rear control arms. Small cracks in the paint or the steel, rust forming along seams and a strange noise or handling when the rear axle is loaded are signs that you should have the area checked properly.

Does this also make sense if there is no damage yet?

Yes. Reinforcing preventively saves you from a much bigger repair to the body later.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,54 kg
Car make

BMW

Model

E46

Reviews

There are no reviews yet.

Be the first to review “BMW E46 Control Arm Mount Reinforcement Rear”
EN

Your Shopping cart

Close