Description
BMW E46 Strut Tower Reinforcement Front
This E46 strut tower reinforcement protects the front strut towers (the shock absorber tops) of the BMW E46 against cracking. On older cars with high mileage, the original sheet metal around the upper shock absorber mount starts to crack. A steel ring under the original top spreads the forces and prevents this.
Especially with stiffer suspension, coilovers or a lot of track and drift work, the strut towers have a hard time. This reinforcement is a small job that is best done while you are working on the front suspension anyway.
Contents
Key benefits of the E46 strut tower reinforcement
- Prevents cracks in the front strut towers
- Fitted as a reinforcement ring under the original top
- 3 mm thick S355 steel
- Laser-cut and bent on CNC press brakes
- Zinc-plated against rust
- Worthwhile with high mileage, coilovers and track use
Suitable for
BMW 3 Series E46, front
- BMW 3 Series E46, front strut towers
Technical specifications
- Item number: 0111
- Application: reinforcement of the front strut tower (shock absorber top)
- Material: S355 steel
- Thickness: 3 mm
- Production: laser-cut, bent on CNC press brakes
- Finish: zinc-plated
- Fitting: as a ring under the original top
- Weight: 0.7 kg
Where do you see the first signs? Open the bonnet and look at the top of the strut towers, around the bolts of the shock absorber mount. Hairline cracks in the paint or the sheet metal are the first signal. If it gets worse, the shock absorber can push through the tower.
Installation and delivery
The reinforcement goes as an extra ring under the original strut tower, at the location of the upper shock absorber mount. To do this, you detach the strut at the top. The most convenient time is when you fit new shock absorbers, strut mounts or coilovers.
Follow the usual workshop rules: car securely on axle stands, compress springs only with a good spring compressor, and tighten all the strut bolts again to the correct torque. Have the front wheel alignment done after the work.
Weak spot at the rear too? Take a look at the reinforcement for the rear shock absorber mount. You will find all reinforcements in our chassis and subframe reinforcements category.
Repairing a cracked strut tower is expensive, preventing it takes a few hours of spanner work.
Why choose an E46 strut tower reinforcement?
Once a strut tower has cracked, it needs welding on the body and often a lot of dismantling. The E46 strut tower reinforcement prevents this by spreading the load of the shock absorber over a larger area. The zinc-plated steel is protected against rust, so the ring lasts as long as the car.
For anyone building an E46 for drifting or track use, this is a logical step alongside stiffer suspension. The stiffer the springs and dampers, the harder every impact hits the tower. With the reinforcement underneath, the tower absorbs those impacts much better, even after a season with lots of kerbs and speed bumps.
Frequently asked questions
Does the E46 strut tower reinforcement have to be welded?
No. The ring is placed under the original top, as an extra reinforcement.
Is the steel protected against rust?
Yes, the rings are zinc-plated.
How thick is the reinforcement?
3 mm, made of S355 steel.
When is the best time to fit it?
When the strut has to come off anyway, for example for new shock absorbers or coilovers.
Is this also useful for a standard E46?
Yes. Cracks mainly develop through age and mileage. Even on an E46 that is driven daily with the original suspension, the E46 strut tower reinforcement can prevent damage.
How many rings are included in the delivery?
The product photo shows two rings. If you are unsure, please ask us before you order.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.