Shop

Description

BMW F32 4 Series Coupé (from 2013) JOM BlueLine coilover kit

The JOM coilover kit F32, part number 741175, is a vehicle-specific, height-adjustable BlueLine kit from German manufacturer JOM for the BMW F32 4 Series Coupé. The front comes down by 35 to 65 mm, the rear by 35 to 65 mm.

Within the adjustment range of the Teilegutachten you decide how low the car sits, and the springs stay preloaded across that whole range. The front axle gets threaded struts, the rear a separate spring system.

Key benefits of the JOM coilover kit F32

• Vehicle-specific for the BMW F32 4 Series Coupé: not a universal kit but matched to this model.
• Lowering 35 to 65 mm front and 35 to 65 mm rear: within the range of the Teilegutachten.
• Adjustable when fitted: no need to remove the kit to change the height.
• Preloaded springs: the preload is kept across the whole adjustment range.
• Cold-wound springs: finished with EPS powder coating.
• Galvanised dampers: better protected against rust.
• High lateral load capacity: built for strong cornering forces.
• §19.3 Teilegutachten (TÜV): the German certificate comes with the kit.
• GOCA certificate for Belgium: can be requested when ordering, for €9.99 extra.

Suitable for

BMW F32 Coupé

• Model years: from 2013
• Engines: 418, 420, 425, 428, 430, 435
• Not suitable for cars with electronic damper control.
• Not sure about the fitment? Please get in touch with us.

Technical specifications of the JOM coilover kit F32

• Manufacturer: JOM Car Parts & Car Hifi GmbH (Bochum)
• Series: BlueLine
• Part number: 741175
• EAN: 4048961096584
• Design: threaded front struts, spring system at the rear
• Front lowering: 35 to 65 mm
• Rear lowering: 35 to 65 mm
• Maximum front axle load: 1090 kg
• Maximum rear axle load: 1230 kg
• Springs: cold-wound, EPS powder-coated
• Dampers: galvanised
• Certification: §19.3 Teilegutachten (TÜV, Germany)
• Net kit weight (JOM figure): 21.32 kg

Fitting and delivery of the JOM coilover kit F32

The kit fits the original mounting points, in place of the standard springs and dampers. After fitting, set the height you want. Have the wheel alignment done afterwards, as camber and toe change with ride height. In Germany the kit is registered after fitting using the Teilegutachten. For the vehicle inspection in Belgium you can request a GOCA certificate when ordering (+ €9.99). Other countries have their own rules for lowered cars. The delivery time for the JOM coilover kit F32 is 4 to 7 days, as long as JOM has the kit in stock. If the kit is temporarily unavailable, the delivery time shows ‘Ask for delivery time’; please contact us for the current delivery time.

JOM BlueLine 741175 for the BMW F32 4 Series Coupé: height-adjustable with the kit fitted, with a §19.3 Teilegutachten.

Why choose this JOM coilover kit F32?

You get a kit matched to this model, with a German certificate and a fixed adjustment range. That makes the JOM BlueLine series a logical choice if you want your BMW F32 4 Series Coupé lower without gambling on universal parts. See also our other coilover kits and all JOM parts.

Downloads and documentation

• Teilegutachten §19.3 (TÜV parts certificate, German, PDF)
• Installation instructions (German, PDF)
• Remaining thread information sheet (German, PDF)

Frequently asked questions

Does the JOM coilover kit F32 fit my BMW F32 4 Series Coupé?

This kit is intended for the BMW F32 Coupé, model years from 2013. Not suitable for cars with electronic damper control. If in doubt, please get in touch with us.

How much can I lower my BMW F32 4 Series Coupé with this kit?

The front comes down by 35 to 65 mm, the rear by 35 to 65 mm. You set the height with the kit fitted.

Is a certificate included?

Yes, this kit comes with a German §19.3 Teilegutachten (TÜV); you will also find it above under downloads. In Germany it is used to register the kit after fitting. Other countries have their own rules; check them before you drive the lowered car on public roads.

Can I request a GOCA certificate?

Yes. Tick the GOCA certificate box when ordering; it costs €9.99 extra. The certificate is intended for the vehicle inspection in Belgium.

Can I use this kit on a car with more power than standard?

Yes. The kit is chosen by model, version and axle load, not by engine power. As long as the axle load stays within the values of the kit, it also suits a car with more power than standard. For registration, check which engines are listed in the Teilegutachten.

What is the delivery time for the JOM coilover kit F32?

The delivery time for the JOM coilover kit F32 is 4 to 7 days, as long as JOM has the kit in stock. If JOM temporarily cannot supply the kit, the delivery time shows ‘Ask for delivery time’. In that case, please contact us and we will find out the current delivery time for you.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.