Shop

The MTS F39 is a height-adjustable coilover kit from MTS Technik for the BMW 1-series (F40), X1 (F48), X2 (F39) and 2-series (F44 and F45), from model year 2013. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 35 to 85 mm, front and rear independently adjustable
• Eibach springs of 30 to 45 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS F39 fits the following versions:

• 1 Series F40 5-door (from 07/2019): 116d, 116i, 118d, 118i, 120d, 120i, 128ti, 120d xDrive
• 2 Series F44 Gran Coupe (from 11/2019): 216d, 218d, 218i, 220d, 220i, 225i, 220d xDrive, 220i xDrive
• 2 Series F45 Active Tourer (11/2013 to 10/2021): 214d, 216d, 216i, 218d, 218i, 220d, 220i, 225i, 218d xDrive, 220d xDrive, 225i xDrive
• X1 (F48) (11/2014 to 12/2022): xDrive18d, xDrive20d, xDrive20i, xDrive25d, xDrive25i, sDrive16d, sDrive18d, sDrive18i, sDrive20d, sDrive20i, sDrive28i
• X2 (F39) (11/2017 to 10/2023): sDrive20d, sDrive20i, sDrive28i, M35i, xDrive20d, xDrive20i, xDrive25d, xDrive28i

Note: axle load: maximum 1150 kg front and maximum 1160 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Product: MTS F39
• Manufacturer: MTS Technik
• Article number: MTSGWBM129
• EAN: 5903855630192
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 35 to 85 mm, rear 30 to 65 mm (depending on the model)
• Springs (Eibach): GWFE26VA with 30 to 45 N/mm front
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS F39 replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Sometimes the rear height adjuster has to be removed to achieve the maximum lowering.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS F39 combines zinc-plated damper bodies, Eibach springs of 30-45 N/mm and up to 85 mm of lowering for the BMW 1 Series (F40), X1 (F48), X2 (F39) and 2 Series (F44 and F45).

Why choose the MTS F39?

With the MTS F39 you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

How long does delivery take?

The MTS F39 is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the F39/F40/F44/F45/F48

• BMW F40/F44/F45/F48 (13-) MTS Technik coilover kit (front and rear camber plates)
• BMW F40/F44/F45/F48 (13-) MTS Technik coilover kit