Shop

The MTS Stance E34 Inox is a height-adjustable weld-in insert kit (coilover) from MTS Technik for the BMW E34 Sedan and Touring, model years 1987 to 1996. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance. This is a weld-in insert kit: the original front struts are shortened and welded.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 20 to 95 mm, front and rear independently adjustable
• Eibach springs of 80 N/mm front and 25 to 43 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS Stance E34 Inox fits the following versions:

• 5 Series E34 Sedan (02/1987 to 12/1995): 518i, 520i, 524td, 525i, 525tds, 530i, 535i, 540i V8, M5
• 5 Series E34 Touring (07/1991 to 07/1996): 518i, 520i, 525i, 525td, 525tds, 530i, 540i, M5

Note for the MTS Stance E34 Inox: not suitable for versions with four-wheel drive (525iX). Only for cars without level control (NIVO) or factory air suspension. Only for cars without electronically controlled damping. Axle load: maximum 1060 kg front and maximum 1300 kg rear; check your car’s vehicle type plate.

Also suitable for versions with M-Technik (M package).

Technical specifications

• Product: MTS Stance E34 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWBM14-S
• EAN: 5903855622715
• Version: Stance, Inox (stainless steel)
• Type of kit: weld-in insert kit, the original front struts are shortened and welded
• Lowering: front 20 to 95 mm, rear 20 to 85 mm
• Springs (Eibach): GWFE81 with 80 N/mm front, GWFE46HA with 25 to 43 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Front ride height: adjustable independently via the lower damper mounts
• Damper body for: diameter 55 mm
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: no
• Weight: 29.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

To fit the MTS Stance E34 Inox, the original front struts are shortened and welded as described in the manual. Have this done by an experienced mechanic or welder.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After fitting the MTS Stance E34 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance E34 Inox combines stainless steel damper bodies, Eibach springs of 80 and 25-43 N/mm and up to 95 mm of lowering for the BMW E34 Sedan and Touring.

Why choose the MTS Stance E34 Inox?

With the MTS Stance E34 Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

Does this kit also fit a four-wheel-drive (525iX) version?

No. The MTS Stance E34 Inox is made for the rear-wheel-drive versions.

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (70 and 25-43 N/mm) and Stance (80 and 25-43 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance E34 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E34

• BMW E34 (87-96) MTS Technik coilover kit (front camber plates, send-in kit)