Shop

The MTS Stance Golf 2 Syncro Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Golf 2/3 / Passat B3/B4 / Jetta 2 with four-wheel drive (Syncro), model years 1983 to 2000. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 25 to 80 mm, front and rear independently adjustable
• Eibach springs of 70 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Stance Golf 2 Syncro Inox fits the following versions:

• Volkswagen Golf 2 (type 19E/1G1, 08/1983 to 12/1992): 1.8 GTI G60 Syncro, 1.8 i Cat Syncro, 1.8 Syncro
• Volkswagen Golf 3 (also Variant, type 1H1/1H5, 10/1989 to 11/2000): 1.8 Syncro, 1.9 TDI Syncro, 2.0 Syncro, 2.9 VR6 Syncro
• Volkswagen Passat B3/B4 (also Variant, type 3A2/35I/3A5, 02/1988 to 12/1997): 1.8 G60 Syncro, 2.0 Syncro, 2.9 VR6 Syncro
• Volkswagen Jetta 2 (type 19E/1G2/165, 08/1983 to 12/1992): 1.8 Syncro

Note for the MTS Stance Golf 2 Syncro Inox: axle load: maximum 1035 kg front and maximum 1060 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Stance Golf 2 Syncro Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWVW44-S
• EAN: 5903855651869
• Version: Stance, Inox (stainless steel)
• Lowering: front 25 to 80 mm, rear 25 to 80 mm
• Springs (Eibach): GWFE84 with 70 N/mm front
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance Golf 2 Syncro Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After fitting the MTS Stance Golf 2 Syncro Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance Golf 2 Syncro Inox combines stainless steel damper bodies, Eibach springs of 70 N/mm and up to 80 mm of lowering for the Volkswagen Golf 2/3 / Passat B3/B4 / Jetta 2 with four-wheel drive (Syncro).

Why choose the MTS Stance Golf 2 Syncro Inox?

With the MTS Stance Golf 2 Syncro Inox you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

Does this kit also fit a version without four-wheel drive?

No. The MTS Stance Golf 2 Syncro Inox is made for the four-wheel-drive (Syncro) versions. MTS Technik has separate kits for the front-wheel drive versions.

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (50 N/mm), Street (60 N/mm) and Stance (70 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance Golf 2 Syncro Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Golf 2

• Volkswagen Golf 2/3 / Passat B3/B4 Syncro (83-00) MTS Technik coilover kit (front camber plates)
• Volkswagen Golf 2/3/4 / Jetta 2, Seat Toledo 1L (83-02) MTS Technik coilover kit
• Volkswagen Golf 2/3/4 / Jetta 2, Seat Toledo 1L (83-02) MTS Technik coilover kit (front camber plates)
• Volkswagen Passat B3/B4 (88-97) MTS Technik coilover kit
• Volkswagen Golf 3 Variant (93-99) MTS Technik coilover kit
• Volkswagen Passat B3/B4 (88-97) MTS Technik coilover kit (without electronic damping, front camber plates)