Shop

The MTS Stance Z3 Gold is a height-adjustable coilover kit from MTS Technik for the BMW Z3 E36 Coupe and Roadster, model years 1995 to 2003. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 35 to 70 mm, front and rear independently adjustable
• Eibach springs of 80 N/mm front and 100 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Stance Z3 Gold fits the following versions:

• Z3 Coupe (E36) (04/1997 to 06/2003): 2.8i, 3.0i
• Z3 Roadster (E36) (10/1995 to 01/2003): 1.8i, 1.9i, 2.0i, 2.2i, 2.8i, 3.0i

Note for the MTS Stance Z3 Gold: not suitable for the M3. Axle load: maximum 830 kg front and maximum 870 kg rear; check your car’s vehicle type plate.

Also suitable for versions with M-Technik (M package).

Technical specifications

• Product: MTS Stance Z3 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM05-S
• EAN: 5903855657281
• Version: Stance, Gold (zinc-plated steel)
• Lowering: front 35 to 70 mm, rear 35 to 95 mm (depending on the model)
• Springs (Eibach): GWFE81 with 80 N/mm front, GWFE117 with 100 N/mm rear
• Helper springs: GWHE01 (20 N/mm) and GWHE24 (5.66 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Stance Z3 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Stance Z3 Gold combines zinc-plated damper bodies, Eibach springs of 80 and 100 N/mm and up to 70 mm of lowering for the BMW Z3 E36 Coupe and Roadster.

Why choose the MTS Stance Z3 Gold?

With the MTS Stance Z3 Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

Does this kit also fit an M3?

No. The MTS Stance Z3 Gold is made for the BMW Z3 E36 Coupe and Roadster, but not for the M3. MTS Technik has its own kit for the M3.

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (50 and 46-90.1 N/mm) and Stance (80 and 100 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Stance Z3 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Z3

• BMW E36 (90-99) MTS Technik coilover kit
• BMW E36 Compact (94-00) MTS Technik coilover kit
• BMW E36 (90-99) MTS Technik coilover kit (front and rear camber plates)
• BMW E36 Compact (94-00) MTS Technik coilover kit (front and rear camber plates)
• BMW E36 (90-99) MTS Technik coilover kit (front camber plates)
• BMW E36 Compact (94-00) MTS Technik coilover kit (front camber plates)