Shop

The MTS Street 370Z Inox is a height-adjustable coilover kit from MTS Technik for the Nissan 370Z (coupe and roadster), from model year 2009. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 5 to 40 mm, front and rear independently adjustable
• Eibach springs of 86 to 105 N/mm front and 80 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street 370Z Inox fits the following versions:

• Nissan 370Z Coupe (Z34) (from 01/2009): 3.7, 3.7 NISMO, NISMO 3.7
• Nissan 370Z Roadster (Z34) (from 01/2009): 3.7

Note: axle load: maximum 980 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street 370Z Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWNI02
• EAN: 5903855651326
• Version: Street, Inox (stainless steel)
• Lowering: front 5 to 40 mm, rear 15 to 55 mm
• Springs (Eibach): GWFE16VA with 86 to 105 N/mm front, GWFE206 with 80 N/mm rear
• Helper springs: GWHE24 (5.66 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street 370Z Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street 370Z Inox combines stainless steel damper bodies, Eibach springs of 86-105 and 80 N/mm and up to 40 mm of lowering for the Nissan 370Z (coupe and roadster).

Why choose the MTS Street 370Z Inox?

With the MTS Street 370Z Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (86-105 and 80 N/mm) and Stance (140 and 100 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street 370Z Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.