Shop

The MTS Street A-klasse W176 Inox is a height-adjustable coilover kit from MTS Technik for the Mercedes A-klasse W176 / CLA C117/X117, model years 2012 to 2019. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 55 mm, front and rear independently adjustable
• Eibach springs of 50 N/mm front and 90 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street A-klasse W176 Inox fits the following versions:

• Mercedes A-klasse W176 (type W176, 06/2012 to 05/2018): A 200 CDI, d 4-matic, A 220 4-matic, A 220 CDI 4-matic, A 220 d 4-matic, A 250 4-matic
• Mercedes CLA C117 Coupe (type C117, 01/2013 to 03/2019): CLA 200 CDI, d 4-matic, CLA 220 4-matic, CLA 220 CDI 4-matic, CLA 220 CDI, CLA 250 4-matic
• Mercedes CLA X117 Shooting Brake (type X117, 01/2015 to 03/2019): CLA 200 CDI, d 4-matic, CLA 220 4-matic, CLA 220 CDI, CLA 220 d 4-matic, CLA 250 4-matic

Note for the MTS Street A-klasse W176 Inox: axle load: maximum 1140 kg front and maximum 1010 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Product: MTS Street A-klasse W176 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWMB25
• EAN: 5903855655157
• Version: Street, Inox (stainless steel)
• Lowering: front 15 to 55 mm, rear 20 to 55 mm (depending on the model)
• Springs (Eibach): GWFE66VA with 50 N/mm front, GWFE165 with 90 N/mm rear
• Helper springs: GWHE24 (5.66 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street A-klasse W176 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street A-klasse W176 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street A-klasse W176 Inox combines stainless steel damper bodies, Eibach springs of 50 and 90 N/mm and up to 55 mm of lowering for the Mercedes A-klasse W176 / CLA C117/X117.

Why choose the MTS Street A-klasse W176 Inox?

With the MTS Street A-klasse W176 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street A-klasse W176 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the A-klasse W176

• Mercedes A-klasse W176 / CLA C117/X117 (12-19) MTS Technik coilover kit (without electronic damping)
• Mercedes A-klasse W176 / CLA C117/X117 (12-19) MTS Technik coilover kit (without electronic damping, front camber plates, springs 50/63 N/mm)
• Mercedes A-klasse W176 / CLA C117/X117 (12-19) MTS Technik coilover kit (without electronic damping, front camber plates, springs 50/90 N/mm)
• Mercedes A-klasse W176 / CLA C117 (12-19) MTS Technik coilover kit (also with electronic damping)
• Mercedes A-klasse W176 / CLA C117 (12-19) MTS Technik coilover kit (without electronic damping, front camber plates)
• Mercedes CLA X117 (15-19) MTS Technik coilover kit