Description
The MTS Street A4 B9 Inox is a height-adjustable coilover kit from MTS Technik for the Audi A4 B9 / A5 F5, from model year 2015. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits of the MTS Street A4 B9 Inox
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 10 to 70 mm, front and rear independently adjustable
- Eibach springs of 80 N/mm front and 64 to 110 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Street A4 B9 Inox fits the following versions:
- Audi A4 B9 (also Avant, type 8W2/8WC/8W5/8WD, from 05/2015): 1.4 TFSI, 2.0 TDI, 2.0 TFSI, 2.0 TFSI Mild Hybrid, 3.0 TDI, 30 TDI, 30 TDI Mild Hybrid, 35 TDI, 35 TDI Mild Hybrid, 35 TFSI Mild Hybrid, 40 TDI, 40 TFSI Mild Hybrid, 45 TFSI Mild Hybrid, 2.0 TDI quattro, 2.0 TFSI quattro, 3.0 TDI quattro, 40 TDI Mild Hybrid quattro, 40 TDI quattro, 45 TFSI Mild Hybrid quattro, 50 TDI quattro, 40 TDI Mild Hybrid
- Audi A5 F5 (also Sportback, type F53/F5P/F5A/F5F, from 06/2016): 1.4 TFSI, 2.0 TDI, 2.0 TFSI, 3.0 TDI, 30 TDI Mild Hybrid, 35 TFSI Mild Hybrid, 40 TDI, 40 TFSI Mild Hybrid, 45 TFSI Mild Hybrid, 2.0 TDI quattro, 2.0 TFSI quattro, 3.0 TDI quattro, 40 TDI Mild Hybrid quattro, 40 TDI quattro, 40 TFSI Mild Hybrid quattro, 45 TFSI Mild Hybrid quattro, 50 TDI quattro, RS5 Quattro, S5 quattro, S5 TDI Mild Hybrid quattro, 35 TDI
Note for the MTS Street A4 B9 Inox: axle load: maximum 1240 kg front and maximum 1220 kg rear; check your car’s vehicle type plate.
Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.
Technical specifications
- Product: MTS Street A4 B9 Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWAU56
- EAN: 5903855650664
- Version: Street, Inox (stainless steel)
- Lowering: front 10 to 70 mm, rear 10 to 70 mm (depending on the model)
- Springs (Eibach): GWFE218 with 80 N/mm front, GWFE252HA with 64 to 110 N/mm rear
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Thread block rear: at the top
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street A4 B9 Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- After fitting the MTS Street A4 B9 Inox, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street A4 B9 Inox combines stainless steel damper bodies, Eibach springs of 80 and 64-110 N/mm and up to 70 mm of lowering for the Audi A4 B9 / A5 F5.
Why choose the MTS Street A4 B9 Inox?
With the MTS Street A4 B9 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street A4 B9 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the A4 B9
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.