Description
The MTS Street Audi 80 B3 quattro Inox is a height-adjustable coilover kit from MTS Technik for the Audi 80 B3 / 90 B3 / Coupe B3 with four-wheel drive (quattro), model years 1986 to 1996. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 20 to 70 mm, front and rear independently adjustable
- Eibach springs of 50 N/mm front and 60 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- 2 year warranty with no mileage limit
Suitable for
The MTS Street Audi 80 B3 quattro Inox fits the following versions:
- Audi 80 B3 Sedan (type 893/894/8A2, 06/1986 to 10/1991): 1.8 E quattro, 1.8 quattro, 1.8 S quattro, 2.0 E 16V quattro, 2.0 E quattro, 2.0 quattro
- Audi 90 B3 (type 893/894/8A2, 04/1987 to 09/1991): 2.0 20V quattro, 2.0 quattro, 2.2 E quattro, 2.3 E 20V quattro, 2.3 E quattro
- Audi Coupe B3 (type 89/8B3, 10/1988 to 12/1996): 2.0 20V quattro, 2.2 quattro, 2.3 20V quattro, 2.3 quattro, 2.6 quattro, 2.8 quattro, S2 quattro
Note for the MTS Street Audi 80 B3 quattro Inox: only for versions with four-wheel drive. Axle load: maximum 1100 kg front and maximum 950 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Street Audi 80 B3 quattro Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWAU32
- EAN: 5903855652231
- Version: Street, Inox (stainless steel)
- Lowering: front 20 to 70 mm, rear 30 to 75 mm
- Springs (Eibach): GWFE80 with 50 N/mm front, GWFE96 with 60 N/mm rear
- Helper springs: GWHE01 (20 N/mm) and GWHE02 (20 N/mm)
- Height adjustment: front and rear via threaded damper body
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: no
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street Audi 80 B3 quattro Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- After fitting the MTS Street Audi 80 B3 quattro Inox, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street Audi 80 B3 quattro Inox combines stainless steel damper bodies, Eibach springs of 50 and 60 N/mm and up to 70 mm of lowering for the Audi 80 B3 / 90 B3 / Coupe B3 with four-wheel drive (quattro).
Why choose the MTS Street Audi 80 B3 quattro Inox?
With the MTS Street Audi 80 B3 quattro Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
Does this kit also fit a version without four-wheel drive?
No. The MTS Street Audi 80 B3 quattro Inox is made for the four-wheel-drive (quattro) versions. MTS Technik has separate kits for the front-wheel drive versions.
What is the difference between Comfort, Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (30-55 and 40 N/mm), Street (50 and 60 N/mm) and Stance (70 and 60 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street Audi 80 B3 quattro Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Audi 80 B3
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.