Shop

The MTS Street Cinquecento Inox is a height-adjustable coilover kit from MTS Technik for the Fiat Cinquecento / Seicento, model years 1991 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 30 to 90 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front and 25 to 70 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS Street Cinquecento Inox fits the following versions:

• Fiat Cinquecento (type 170, 07/1991 to 07/1999): 0.7, 0.7 i, 0.9, 0.9 i.e, 0.9 i.e. S, 1.1 Sporting
• Fiat Seicento (type 187, 11/1997 to 01/2010): 0.9, 1.1

Note for the MTS Street Cinquecento Inox: axle load: maximum 610 kg front and maximum 630 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Cinquecento Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWFI09
• EAN: 5903855652316
• Version: Street, Inox (stainless steel)
• Lowering: front 30 to 90 mm, rear 50 to 100 mm
• Springs (Eibach): GWFE96 with 60 N/mm front, GWFE22HA with 25 to 70 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Cinquecento Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Cinquecento Inox combines stainless steel damper bodies, Eibach springs of 60 and 25-70 N/mm and up to 90 mm of lowering for the Fiat Cinquecento / Seicento.

Why choose the MTS Street Cinquecento Inox?

With the MTS Street Cinquecento Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (60 and 25-70 N/mm) and Stance (70 and 25-70 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Cinquecento Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Cinquecento

• Fiat Cinquecento / Seicento (91-10) MTS Technik coilover kit