Shop

The MTS Street Corsa C Inox is a height-adjustable coilover kit from MTS Technik for the Opel Corsa C / Tigra TwinTop, model years 2000 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 70 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front and 27.3 to 52 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Corsa C Inox fits the following versions:

• Opel Corsa C (type X01, 09/2000 to 12/2009): 1.0, 1.2, 1.2 Twinport, 1.3 CDTI, 1.4, 1.4 Twinport, 1.7 CDTI, 1.7 DI, 1.7 DTI, 1.8
• Opel Tigra TwinTop (type X04, 06/2004 to 12/2010): 1.3 CDTI, 1.4, 1.8

Note for the MTS Street Corsa C Inox: axle load: maximum 880 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

For cars with an M14 lower mount on the rear damper.

Technical specifications

• Product: MTS Street Corsa C Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWOP13
• EAN: 5903855651708
• Version: Street, Inox (stainless steel)
• Lowering: front 15 to 70 mm, rear 15 to 70 mm
• Springs (Eibach): GWFE96 with 60 N/mm front, GWFE21HA with 27.3 to 52 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Corsa C Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Corsa C Inox combines stainless steel damper bodies, Eibach springs of 60 and 27.3-52 N/mm and up to 70 mm of lowering for the Opel Corsa C / Tigra TwinTop.

Why choose the MTS Street Corsa C Inox?

With the MTS Street Corsa C Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (60 and 27.3-52 N/mm) and Stance (70 and 27.3-52 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Corsa C Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Corsa C

• Opel Corsa C / Tigra TwinTop (00-10) MTS Technik coilover kit (M10 rear damper mount)