Shop

The MTS Street E30 Gold is a height-adjustable weld-in insert kit (coilover) from MTS Technik for the BMW E30 Sedan, Cabrio and Touring, model years 1982 to 1994. Street is the standard setup from MTS Technik: a good balance between comfort and firmness.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised. This is a weld-in insert kit: the original front struts are shortened and welded.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 25 to 90 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front and 46 to 90.1 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front and rear camber plates included, so you can adjust the camber
• 2 year warranty with no mileage limit

Suitable for

The MTS Street E30 Gold fits the following versions:

• 3 Series E30 Sedan (09/1982 to 03/1992): 315, 316, 316i, 318i, 318is, 320i, 323i, 324d, 324td, 325e 2.7, 325i
• 3 Series E30 Cabrio (09/1982 to 11/1993): 318i, 320i, 325i
• 3 Series E30 Touring (07/1987 to 10/1994): 316i, 318i, 320i, 324td, 325i

Note for the MTS Street E30 Gold: not suitable for versions with four-wheel drive (325iX). Axle load: maximum 865 kg front and maximum 1030 kg rear; check your car’s vehicle type plate.

Also suitable for versions with M-Technik (M package).

Technical specifications

• Product: MTS Street E30 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM102
• EAN: 5903855621503
• Version: Street, Gold (zinc-plated steel)
• Type of kit: weld-in insert kit, the original front struts are shortened and welded
• Lowering: front 25 to 90 mm, rear 25 to 60 mm
• Springs (Eibach): GWFE96 with 60 N/mm front, GWFE06HA with 46 to 90.1 N/mm rear
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Front ride height: adjustable independently via the lower damper mounts
• Thread block rear: at the top
• Damper body for: diameter 51 mm
• Camber plates: included front and rear
• Included: complete front and rear set with springs and height adjustment, plus front and rear camber plates
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

To fit the MTS Street E30 Gold, the original front struts are shortened and welded as described in the manual. Have this done by an experienced mechanic or welder.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street E30 Gold, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street E30 Gold combines zinc-plated damper bodies, Eibach springs of 60 and 46-90.1 N/mm and up to 90 mm of lowering for the BMW E30 Sedan, Convertible and Touring.

Why choose the MTS Street E30 Gold?

With the MTS Street E30 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

Does this kit also fit a four-wheel-drive (325iX) version?

No. The MTS Street E30 Gold is made for the rear-wheel-drive versions.

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (50 and 46-90.1 N/mm), Street (60 and 46-90.1 N/mm) and Stance (80 and 260 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street E30 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E30

• BMW E30 (82-94) MTS Technik coilover kit (45 mm strut, front camber plates, weld-in insert kit)
• BMW E30 (82-94) MTS Technik coilover kit (51 mm strut)
• BMW E30 (82-94) MTS Technik coilover kit (51 mm strut, front camber plates, weld-in insert kit)
• BMW E30 (82-94) MTS Technik coilover kit (51 mm strut, front camber plates, send-in kit)
• BMW E30 (82-94) MTS Technik coilover kit (45 mm strut, front camber plates, send-in kit)
• BMW E30 (82-94) MTS Technik coilover kit (45 mm strut, front and rear camber plates, weld-in insert kit)