Shop

The MTS Street Focus C-Max Inox is a height-adjustable coilover kit from MTS Technik for the Ford Focus C-Max / C-Max, model years 2003 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 35 to 70 mm, front and rear independently adjustable
• Eibach springs of 32 to 65 N/mm front and 70 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• 2 year warranty with no mileage limit

Suitable for

The MTS Street Focus C-Max Inox fits the following versions:

• Ford Focus C-Max (type DM2, 10/2003 to 03/2007): 1.6, 1.6 TDCi, 1.6 Ti, 1.8, 1.8 TDCi, 2.0, 2.0 TDCi
• Ford C-Max (type DM2, 02/2007 to 09/2010): 1.6, 1.6 TDCi, 1.8, 1.8 TDCi, 2.0, 2.0 TDCi

Note: not suitable for versions with four-wheel drive (AWD). Only for cars without level control (NIVO) or factory air suspension. Axle load: maximum 1115 kg front and maximum 1165 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street Focus C-Max Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWFO18
• EAN: 5903855629684
• Version: Street, Inox (stainless steel)
• Lowering: front 35 to 70 mm, rear 20 to 55 mm
• Springs (Eibach): GWFE263VA with 32 to 65 N/mm front, GWFE93 with 70 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: no
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Focus C-Max Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Focus C-Max Inox combines stainless steel damper bodies, Eibach springs of 32-65 and 70 N/mm and up to 70 mm of lowering for the Ford Focus C-Max / C-Max.

Why choose the MTS Street Focus C-Max Inox?

Street is the setup that MTS Technik itself recommends as the standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

Does this kit also fit a four-wheel-drive (AWD) version?

No. The MTS Street Focus C-Max Inox is not suitable for the four-wheel-drive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Focus C-Max Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.