Shop

The MTS Street G20 Gold is a height-adjustable coilover kit from MTS Technik for the BMW 3-series (G20 and G21) and 4-series (G23 and G26), from model year 2018. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

• Zinc-plated damper bodies with a yellow zinc coating to protect against rust
• Lower by 24 to 60 mm, front and rear independently adjustable
• Eibach springs of 38 to 50 N/mm front and 140 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• Front camber plates included, so you can adjust the camber
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street G20 Gold fits the following versions:

• 3 Series G20 Sedan (from 11/2018): 320e Plug-in-Hybrid, 330e Plug-in-Hybrid
• 3 Series G21 Touring (from 07/2019): 316d, 316d Mild-Hybrid, 318d, 318d Mild-Hybrid, 318i, 320d, 320d Mild-Hybrid, 320i, 330d, 330d Mild-Hybrid, 330i, 320e Plug-in-Hybrid, 330e Plug-in-Hybrid
• 4 Series G26 Gran Coupe (from 07/2021): 420d Mild-Hybrid, 420i, 430i, M440i Mild-Hybrid
• 4 Series G23 Cabrio (from 11/2020): 420d Mild-Hybrid, 420i, 430d Mild-Hybrid, 430i, M440i Mild-Hybrid

Note for the MTS Street G20 Gold: not suitable for versions with four-wheel drive (xDrive). Only for cars without level control (NIVO) or factory air suspension. Axle load: 1071 to 1170 kg front and maximum 1445 kg rear; check your car’s vehicle type plate.

Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled.

Technical specifications

• Product: MTS Street G20 Gold
• Manufacturer: MTS Technik
• Article number: MTSGWBM79
• EAN: 5903855628564
• Version: Street, Gold (zinc-plated steel)
• Lowering: front 24 to 60 mm, rear 30 to 60 mm (depending on the model)
• Springs (Eibach): GWFE303VA with 38 to 50 N/mm front, GWFE321 with 140 N/mm rear
• Helper springs: GWHE01 (20 N/mm)
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the top
• Camber plates: included at the front
• Included: complete front and rear set with springs and height adjustment, plus front camber plates
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street G20 Gold replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street G20 Gold, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street G20 Gold combines zinc-plated damper bodies, Eibach springs of 38-50 and 140 N/mm and up to 60 mm of lowering for the BMW 3 Series (G20 and G21) and 4 Series (G23 and G26).

Why choose the MTS Street G20 Gold?

With the MTS Street G20 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.

Frequently asked questions

Does this kit also fit a four-wheel-drive (xDrive) version?

No. The MTS Street G20 Gold is made for the rear-wheel-drive versions. MTS Technik has separate kits for the xDrive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street G20 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the G20/G21/G23/G26

• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front axle up to 1030 kg)
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front axle 1031 to 1170 kg)
• BMW G21/G23/G26 (19-) MTS Technik coilover kit
• BMW G20/G21/G23/G26 (18-) MTS Technik coilover kit
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front camber plates, front axle up to 1030 kg)
• BMW G20/G22/G42 (18-) MTS Technik coilover kit (front camber plates, front axle 1031 to 1170 kg)