Shop

The MTS Street Golf 2 Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Golf 2/3/4 / Jetta 2 / Vento / Corrado and Seat Toledo 1L, model years 1983 to 2002. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits of the MTS Street Golf 2 Inox

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 25 to 80 mm, front and rear independently adjustable
• Eibach springs of 60 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Golf 2 Inox fits the following versions:

• Volkswagen Golf 2 (type 19E/1G1, 08/1983 to 12/1992): 1.0, 1.3, 1.3 Cat, 1.6, 1.6 D, 1.6 TD, 1.8, 1.8 GTI, 1.8 GTI 16V, 1.8 GTI Cat, 1.8 GTI G60, 1.8 i Cat
• Volkswagen Golf 3 (also Cabrio, type 1H1/1E7, 10/1989 to 11/2000): 1.4, 1.6, 1.8, 1.9 D, 1.9 SDI, 1.9 TD, GTD, 1.9 TDI, 2.0, 2.0 GL, 2.0 GTI 16V, 2.8 VR6
• Volkswagen Golf 4 Cabrio (type 1E7, 06/1998 to 12/2002): 1.6, 1.8, 1.9 TDI, 2.0
• Volkswagen Jetta 2 (type 19E/1G2/165, 08/1983 to 12/1992): 1.3, 1.3 Cat, 1.6, 1.6 D, 1.6 TD, 1.8, 1.8 16V, 1.8 Cat
• Volkswagen Vento (type 1H2, 11/1991 to 11/2000): 1.4, 1.6, 1.8, 1.9 D, 1.9 SDI, 1.9 TD, 1.9 TDI, 2.0, 2.0 GL, 2.8 VR6
• Volkswagen Corrado (type 53I, 08/1987 to 12/1995): 1.8 16V, 1.8 G60, 2.0 i, 2.0 i 16V, 2.9 VR6
• Seat Toledo 1L (type 1L2, 01/1991 to 10/1999): 1.6 i, 1.8 16V, 1.8 i, 1.9 D, 1.9 TD, 1.9 TDI, 2.0 i, 2.0 i 16V

Note for the MTS Street Golf 2 Inox: not suitable for versions with four-wheel drive (4Motion or 4Drive). Axle load: maximum 980 kg front and maximum 880 kg rear; check your car’s vehicle type plate.

Technical specifications of the MTS Street Golf 2 Inox

• Product: MTS Street Golf 2 Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWVW08
• EAN: 5903855651746
• Version: Street, Inox (stainless steel)
• Lowering: front 25 to 80 mm, rear 25 to 80 mm (depending on the model)
• Springs (Eibach): GWFE97 with 60 N/mm front
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front and rear via threaded damper body
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Golf 2 Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After fitting the MTS Street Golf 2 Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Golf 2 Inox combines stainless steel damper bodies, Eibach springs of 60 N/mm and up to 80 mm of lowering for the Volkswagen Golf 2/3/4 / Jetta 2 / Vento / Corrado and Seat Toledo 1L.

Why choose the MTS Street Golf 2 Inox?

With the MTS Street Golf 2 Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

Does this kit also fit a four-wheel-drive (4Motion or 4Drive) version?

No. The MTS Street Golf 2 Inox is not suitable for the four-wheel-drive versions. MTS Technik has separate sets for that.

What is the difference between Comfort, Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (50 N/mm), Street (60 N/mm) and Stance (70 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Golf 2 Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Golf 2

• Volkswagen Golf 2/3/4 / Jetta 2, Seat Toledo 1L (83-02) MTS Technik coilover kit (front camber plates)
• Volkswagen Golf 2/3 / Passat B3/B4 Syncro (83-00) MTS Technik coilover kit
• Volkswagen Golf 2/3 / Passat B3/B4 Syncro (83-00) MTS Technik coilover kit (front camber plates)
• Volkswagen Golf 4 / Bora, Audi A3 8L (96-13) MTS Technik coilover kit (front axle up to 1030 kg)
• Volkswagen Golf 4 / Bora, Audi A3 8L (96-13) MTS Technik coilover kit (front axle up to 1110 kg)
• Volkswagen Golf 3 Variant (93-99) MTS Technik coilover kit