Description
The MTS Street Polo 6R Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Polo 6R, Audi A1 8X, Seat Ibiza 6J and Skoda Fabia 2/3, model years 2008 to 2022. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits of the MTS Street Polo 6R Inox
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 15 to 60 mm, front and rear independently adjustable
- Eibach springs of 60 N/mm front and 17 to 37.5 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Street Polo 6R Inox fits the following versions:
- Volkswagen Polo 6R (type 6R1/6C1, 03/2009 to 06/2022): 1.0, 1.0 TSI, 1.2, 1.2 TDI, 1.2 TSI, 1.2 TSI 16V, 1.4, 1.4 BiFuel, 1.4 GTI, 1.4 TDI, 1.4 TSI, 1.6, 1.6 BiFuel, 1.6 TDI, 1.8 GTI, 1.8 GTI 230, 2.0 R WRC
- Audi A1 8X (also Sportback, type 8X1/8XK/8XA/8XF, 05/2010 to 09/2019): 1.0 TFSI, 1.2 TFSI, 1.4 TDI, 1.4 TFSI, 1.4 TSI, 1.6 TDI, 1.8 TFSI, 2.0 TDI
- Seat Ibiza 6J (also SC and ST, 03/2008 to 12/2018): 1.0, 1.0 TSI, 1.2, 1.2 LPG, 1.2 TDI, 1.2 TSI, 1.4, 1.4 LPG, 1.4 TDI, 1.4 TSI, 1.6, 1.6 LPG, 1.6 TDI, 1.9 TDI, 2.0 TDI
- Skoda Fabia 2 (also Combi, type 542/545, 01/2009 to 12/2014): 1.2, 1.2 12V, 1.2 TDI, 1.2 TSI, 1.4, 1.4 TDI, 1.4 TSI RS, 1.6, 1.6 TDI, 1.9 TDI
- Skoda Fabia 3 (also Estate, type NJ3/NJ5, 08/2014 to 12/2022): 1.0, 1.0 TSI, 1.2 TSI, 1.4 TDI, 1.4 TSI R5, 1.6
Note for the MTS Street Polo 6R Inox: axle load: maximum 960 kg front and maximum 840 kg rear; check your car’s vehicle type plate.
Fitting is also possible on cars with electronically adjustable damping; that system must then be disabled. For cars with top mount 1J0 412 331.
Technical specifications of the MTS Street Polo 6R Inox
- Product: MTS Street Polo 6R Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWVW46
- EAN: 5903855655300
- Version: Street, Inox (stainless steel)
- Lowering: front 15 to 60 mm, rear 15 to 60 mm
- Springs (Eibach): GWFE96 with 60 N/mm front, GWFE12HA with 17 to 37.5 N/mm rear
- Helper springs: GWHE01 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Thread block rear: at the bottom
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street Polo 6R Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- After fitting the MTS Street Polo 6R Inox, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street Polo 6R Inox combines stainless steel damper bodies, Eibach springs of 60 and 17-37.5 N/mm and up to 60 mm of lowering for the Volkswagen Polo 6R, Audi A1 8X, Seat Ibiza 6J and Skoda Fabia 2/3.
Why choose the MTS Street Polo 6R Inox?
With the MTS Street Polo 6R Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
What is the difference between Comfort and Street?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (50 and 17-37.5 N/mm) and Street (60 and 17-37.5 N/mm). Comfort is the softest. Street is the standard.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street Polo 6R Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Polo 6R
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.