Shop

The MTS Street Polo 9N Inox is a height-adjustable coilover kit from MTS Technik for the Volkswagen Polo 9N / Fox, Seat Ibiza 6L / Cordoba 6L and Skoda Fabia 1/2, from model year 1999. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.

Key benefits of the MTS Street Polo 9N Inox

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 15 to 55 mm, front and rear independently adjustable
• Eibach springs of 32 N/mm front and 40 N/mm rear
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Polo 9N Inox fits the following versions:

• Volkswagen Polo 9N (also Sedan, from 10/2001): 1.2, 1.2 12V, 1.4, 1.4 16V, 1.4 FSI, 1.4 TDI, 1.6, 1.6 16V, 1.8 GTI, 1.9 SDI, 1.9 TDI
• Volkswagen Fox Hatchback (type 5Z1/5Z3/5Z4, 08/2003 to 10/2021): 1.2, 1.4, 1.4 TDI
• Seat Ibiza 6L (type 6L1, 02/2002 to 11/2009): 1.2, 1.2 12V, 1.4 16V, 1.4 TDI, 1.6, 1.6 16V, 1.8 T Cupra R, 1.8 T FR, 1.9 SDI, 1.9 TDI, 2.0
• Seat Cordoba 6L (type 6L2, 09/2002 to 11/2009): 1.2, 1.2 12V, 1.4 16V, 1.4 TDI, 1.6, 1.6 16V, 1.9 SDI, 1.9 TDI, 2.0
• Skoda Fabia 1 (also Sedan and Combi, type 6Y2/6Y3/6Y5, 08/1999 to 03/2008): 1.0, 1.2, 1.4, 1.4 16V, 1.4 TDI, 1.9 SDI, 1.9 TDI, 1.9 TDI RS, 2.0
• Skoda Fabia 2 (also Combi, type 542/545, 12/2006 to 12/2008): 1.2, 1.4, 1.4 TDI, 1.6, 1.9 TDI

Note for the MTS Street Polo 9N Inox: only for cars without electronically controlled damping. Axle load: maximum 960 kg front and maximum 840 kg rear; check your car’s vehicle type plate.

For cars with top mount 6Q0 412 331.

Technical specifications

• Product: MTS Street Polo 9N Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWVW29
• EAN: 5903855655287
• Version: Street, Inox (stainless steel)
• Lowering: front 15 to 55 mm, rear 20 to 60 mm
• Springs (Eibach): GWFE22VA with 32 N/mm front, GWFE187 with 40 N/mm rear
• Height adjustment: front via threaded damper body, rear via separate adjuster element
• Thread block rear: at the bottom
• Camber plates: not included
• Included: complete front and rear set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Polo 9N Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
• After fitting the MTS Street Polo 9N Inox, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Polo 9N Inox combines stainless steel damper bodies, Eibach springs of 32 and 40 N/mm and up to 55 mm of lowering for the Volkswagen Polo 9N / Fox, Seat Ibiza 6L / Cordoba 6L and Skoda Fabia 1/2.

Why choose the MTS Street Polo 9N Inox?

With the MTS Street Polo 9N Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (32 and 40 N/mm) and Stance (50 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Polo 9N Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Polo 9N

• Volkswagen Polo 6R, Audi A1 8X, Seat Ibiza 6J (08-22) MTS Technik coilover kit (top mount 1J0 412 331, also with electronic damping)
• Volkswagen Polo 6R, Audi A1 8X, Seat Ibiza 6J (08-22) MTS Technik coilover kit (front camber plates)