BMW F22 F23 M2 F87 Rear Lower Strut Brace

€57,84 Incl. VAT

BMW F22 F23 M2 F87 Rear Lower Strut Brace

Lower rear strut brace for the BMW 2 Series F22 and F23 and the M2 F87. It is fitted to the original holes in the body and you do not have to cut into the trim. 40 x 20 mm flat oval steel with a 3 mm wall, MIG/MAG-welded and powder-coated black, weight 1.55 kg.

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: 0012 Category:

Description

BMW F22 F23 M2 F87 Rear Lower Strut Brace

This F87 rear lower strut brace connects the left and right side of the rear low down in the boot and fits the BMW M2 F87 as well as the 2 Series F22 coupé and F23 convertible. The brace is intended to improve handling: the rear end stays tighter when turning in hard, on track and while drifting.

A big advantage is the simple installation. The brace goes on the original holes in the body and you do not need to change anything on the boot trim. This keeps your interior tidy and you can also remove the brace again later.

Key benefits of this F87 rear lower strut brace

  • Fits the F22, F23 and M2 F87
  • No cutting of the trim needed
  • Fits on the original holes in the body
  • Flat oval steel profile of 40 x 20 mm with 3 mm wall
  • MIG/MAG-welded in special jigs by an experienced, certified welder
  • Black powder coating, suits any paint colour
  • Light: 1.55 kg

Suitable for

BMW 2 Series and M2

  • BMW 2 Series F22 coupé
  • BMW 2 Series F23 convertible
  • BMW M2 F87

For the M2 there is also an upper brace, which is fitted higher up in the rear.

Technical specifications

  • Item number: 0012
  • Position: rear, lower brace in the boot
  • Main profile: flat oval steel, 40 x 20 mm
  • Wall thickness: 3 mm
  • Welding: MIG/MAG in welding jigs
  • Finish: powder-coated black
  • Mounting: original holes in the body
  • Weight: 1.55 kg

Installation and delivery

Installation is simple. Locate the original mounting points in the boot, put the brace in place and fix it to those holes. You do not need to shorten or damage the trim. Tighten the bolts evenly with a torque wrench and check after the first few hundred kilometres that everything is still tight.

The brace sits low in the boot, just above the floor. That makes an F87 rear lower strut brace a logical choice for an M2 or 2 Series that is driven both on the road and on the circuit.

See our full range in the strut braces category. For the M2 there is also the M2 F87 rear upper strut brace.

A stiffer rear end without sacrificing a centimetre of your interior.

Why choose this F87 rear lower strut brace?

With coilovers and sports tyres, the rear of a 2 Series or M2 has to cope with much more force than from the factory. This brace links both sides with a heavy steel profile, fits the original holes and requires no changes to the interior. Welded in jigs, so the dimensions are right and fitting goes without any trial and error.

Frequently asked questions

Does the brace also fit the M2?

Yes, the F87 rear lower strut brace fits the M2 F87 and also the F22 and F23.

Do I have to cut into the trim?

No, that is not necessary. The F87 rear lower strut brace is fitted to the original holes in the body.

Is this the upper or the lower brace?

This is the lower version. For the M2 we also have an upper brace.

What is the brace made of?

40 x 20 mm flat oval steel with a 3 mm wall, powder-coated black.

How much does the brace weigh?

The brace weighs 1.55 kg. This means an F87 rear lower strut brace adds hardly any weight to the car.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight1,84 kg
Car make

BMW

Model

F87, F22, M2 F87

Reviews

There are no reviews yet.

Be the first to review “BMW F22 F23 M2 F87 Rear Lower Strut Brace”
EN

Your Shopping cart

Close