Adamat Toyota 1UZ/3UZ-FE conversion kit with STAGE2 clutch 780 Nm for BMW S5D, GS5 and GS6

€1.094,53 Incl. VAT

Adamat Toyota 1UZ/3UZ-FE conversion kit with STAGE2 clutch 780 Nm for BMW S5D, GS5 and GS6

Heavier-duty conversion kit to connect a Toyota 1UZ-FE or 3UZ-FE V8 to a manual BMW gearbox: duralumin adapter plate, 6.4 kg AlZnMg+Ti flywheel, a 240 mm clutch disc with SAULEDA SF-MC2 aramid kevlar lining and a reinforced SACHS Racing pressure plate. STAGE2 is made for engines up to 780 Nm. When ordering, you choose your gearbox and can leave a note for Adamat. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch disc to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, engine code, a different engine tilt or anything else Adamat needs to take into account.

SKU: ADM-195 Category: Brand:

Description

Adamat Toyota 1UZ/3UZ-FE conversion kit with STAGE2 clutch 780 Nm for BMW S5D, GS5 and GS6

The 1UZ STAGE2 conversion kit from Adamat Performance is the heavier-duty version of the single-disc clutch for a Toyota 1UZ-FE or 3UZ-FE V8 behind a manual BMW gearbox. You get a clutch disc with SAULEDA SF-MC2 aramid kevlar lining and a reinforced SACHS Racing pressure plate, together good for engines up to 780 Nm.

The kit also includes a duralumin AW-2017A adapter plate, a 6.4 kg AlZnMg+Ti flywheel, a release bearing and all bolts. Adamat makes everything to fit the BMW gearbox you choose when ordering, from the S5D from the E30 and E36 to the GS6-53 from the E90 and E60.

Adamat uses these clutches in heavy motorsport and in street projects. If your UZ has more horsepower than stock, STAGE2 gives you extra margin above the 650 Nm of the basic kit.

Key benefits

  • Up to 780 Nm thanks to the SAULEDA SF-MC2 lining and the SACHS Racing pressure plate
  • SAULEDA SF-MC2 aramid kevlar lining on a 240 mm clutch disc
  • Sprung disc for the GS6-53: these gearboxes get a damped disc, the other gearboxes a rigid disc
  • Reinforced SACHS Racing pressure plate, including release bearing
  • 6.4 kg AlZnMg+Ti flywheel, CNC-machined and with ring gear
  • Flywheel that dissipates heat from the replaceable cast iron friction surface, where a steel flywheel can warp due to overheating
  • Pilot bearing matched to your gearbox: in the flywheel, or a centring spigot for the bearing in the input shaft
  • Class 12.9 flywheel bolts and bolts for adapter and gearbox
  • Dynamically balanced as a complete clutch

Suitable for

Engine: Toyota 1UZ-FE and 3UZ-FE V8, up to 780 Nm

Gearbox: manual BMW gearboxes, including the xDrive versions

BMW gearboxFrom chassisOriginal engineInput shaft
GS6-53BZ (6-speed, also xDrive GS6X53BZ)E82, E90-E93, E60-E64N5432,5×35-26N
GS6-53DZ (6-speed, also xDrive GS6X53DZ)E46, E82, E90-E93, E60-E64M57N, M57N232,5×35-26N
GS6-37BZ (6-speed, also xDrive GS6X37BZ)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61N52, M5423,13×29,13-22N
GS6-37DZ (6-speed, also xDrive GS6X37DZ)E46, E39, E85, E86, E81, E87, E90, E91, E60, E61M47, M47N, M47N2, N47, N47N223,13×29,13-22N
GS5-39DZ (5-speed)E46, E39M5728×35-10N
S5D-320Z, S5D-310Z, S5D-260Z (5-speed)E30, E36, E34, E39, E38, E46M50, M52, S50, S5223×29-10N

In the selection list, the GS6-53DZ versions are listed separately by engine and bell housing, so Adamat knows exactly which gearbox you have. If your gearbox is not listed, choose “Other gearbox” and enter the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: ADM-195
  • Engine: Toyota 1UZ-FE and 3UZ-FE
  • Maximum torque: 780 Nm (STAGE2)
  • Adapter plate: duralumin AW-2017A
  • Flywheel: single-mass, AlZnMg+Ti, CNC-machined, 6.4 kg, with ring gear and replaceable cast iron friction surface
  • Clutch disc: 1x 240 mm, SAULEDA SF-MC2 aramid kevlar lining; rigid, or sprung for GS6-53 gearboxes
  • Pressure plate: SACHS Racing, reinforced
  • Pilot bearing: in the flywheel, or centring spigot for the bearing in the input shaft, depending on the gearbox
  • Bolts: class 12.9 flywheel bolts, bolts for adapter and gearbox
  • Included: adapter plate, flywheel with ring gear, clutch disc, SACHS Racing pressure plate, release bearing and bolts

Installation and delivery

The adapter plate connects the 1UZ block to the bell housing of the BMW gearbox. Flywheel, disc and pressure plate are balanced together, so you fit the clutch as one unit. Adamat decides whether the pilot bearing goes in the flywheel or on the input shaft based on the gearbox you choose.

Choose your gearbox when ordering. In the note field you add extra information, such as your chassis, your engine code or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks.

STAGE2 for the UZ swap: aramid kevlar disc and SACHS Racing pressure plate for 780 Nm, made to fit your BMW gearbox.

Why choose this 1UZ STAGE2 conversion kit?

The flywheel is the heart of this kit. Adamat uses AlZnMg+Ti because this alloy is stronger than the steels normally used for flywheels, and even stronger than the nodular cast iron of crankshafts. In addition, the flywheel acts as a radiator for the cast iron friction surface, something Adamat has demonstrated in its own test against a steel flywheel. Combined with the SAULEDA disc and the SACHS Racing pressure plate, you get a clutch that handles more torque and more heat than the basic kit. If 780 Nm is still not enough, Adamat builds multi-disc clutches up to 2400 Nm.

Frequently asked questions

What is the difference between STAGE1 and STAGE2?

STAGE1 has a LUK 8090S disc and a SACHS pressure plate with SAC mechanism for a maximum of 650 Nm. STAGE2 has a SAULEDA SF-MC2 aramid kevlar disc and a reinforced SACHS Racing pressure plate for a maximum of 780 Nm. The adapter plate and the 6.4 kg flywheel are included in both kits.

Which gearboxes can I choose?

The S5D 5-speed gearboxes, the GS5-39DZ, the GS6-37BZ and GS6-37DZ and the GS6-53BZ and GS6-53DZ, also in xDrive versions. If your gearbox is not listed, choose “Other gearbox” and state the code in the note field.

Does the 1UZ STAGE2 conversion kit also fit the 3UZ-FE?

Yes, the 1UZ STAGE2 conversion kit is made for both the 1UZ-FE and the 3UZ-FE.

What is included in the kit?

Adapter plate, flywheel with ring gear, 240 mm clutch disc with SAULEDA SF-MC2 lining, SACHS Racing pressure plate, release bearing, class 12.9 flywheel bolts and bolts for adapter and gearbox.

What is the lead time?

Adamat makes the kit to order for your gearbox. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight17 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Toyota 1UZ/3UZ-FE conversion kit with STAGE2 clutch 780 Nm for BMW S5D, GS5 and GS6”
EN

Your Shopping cart

Close