Adamat BMW M60/M62/S62/N62 clutch kit 650 Nm for BMW gearboxes

€1.328,63 Incl. VAT

Adamat BMW M60/M62/S62/N62 clutch kit 650 Nm for BMW gearboxes

Set to connect a BMW V8 to a manual BMW gearbox: adapter plate made of duraluminium 2017A with opening for the crankshaft sensor, 7.9 kg flywheel made of AlZnMg+Ti with trigger ring, 240 mm clutch disc with LUK 8090S lining and a SACHS pressure plate. The clutch is made for engines up to 650 Nm. When ordering, you choose your gearbox and can leave a note for Adamat. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Adamat makes the adapter and the clutch disc to fit your gearbox. Choose the code of your gearbox.

If you have a GS6 gearbox, enter the letter code on the type plate or sticker, for example HGD, JGL or HGU. Leave this field empty for an S5D, GS5 or S6S gearbox.

For example your chassis, the version of your GS6 gearbox, a different engine inclination or anything else Adamat needs to take into account.

SKU: ADM-182 Category: Brand:

Description

Adamat BMW M60/M62/S62/N62 clutch kit 650 Nm for BMW gearboxes

With this BMW V8 clutch kit from Adamat Performance, you put an M60, M62, S62 or N62 behind a manual BMW gearbox from the six-cylinder range. The set contains an adapter plate, a light flywheel, a 240 mm clutch disc, a SACHS pressure plate, a release bearing and the bolts for flywheel, adapter and gearbox. The clutch is made for engines up to 650 Nm.

Adamat has given the adapter plate an opening for the crankshaft sensor. On the M62, S62 and N62 this sensor sits in the bell housing of the gearbox, so with this adapter it keeps its place. For this, the flywheel has a trigger ring on the starter ring gear.

When ordering, you choose which BMW gearbox you use. Adamat makes the adapter and the spline of the clutch disc to fit it, so that engine and gearbox fit together without guesswork.

Main advantages

  • Complete V8-to-BMW-gearbox set: adapter plate, flywheel, clutch disc, pressure plate, release bearing and bolts
  • Opening for the crankshaft sensor in the adapter plate, needed on the M62, S62 and N62
  • Trigger ring on the starter ring gear for the crankshaft signal
  • 7.9 kg flywheel made of AlZnMg+Ti, fully CNC-machined from an aerospace alloy
  • Replaceable friction surface made of GJS600 nodular cast iron, so the flywheel is easy to overhaul
  • 240 mm clutch disc with LUK 8090S lining with Kevlar
  • SACHS pressure plate with SAC mechanism from the E90 3.0d, with release bearing
  • Adapter plate made of duraluminium 2017A, matched to the chosen gearbox
  • Dynamically balanced as a complete clutch

Suitable for

Engine: BMW V8 M60, M62, S62 and N62, up to 650 Nm

Gearbox: manual BMW gearboxes from the S5D, GS5, GS6 and S6S series

BMW gearboxFor example fromOriginal engineGearbox capacity according to Adamat
S5D-320Z, S5D-310Z, S5D-260Z (ZF 5-speed)E36 328i, E46 328i and 330i, E39 528i and 530iM50, M52, M54, S50, S52up to 650 hp / 800 Nm
GS5-39DZ (5-speed)E46 330d, E39 525d and 530dM57up to 800 hp / 1100 Nm
GS6-37BZ and GS6-37DZ (6-speed)E46 330i and other modelsM54 (BZ), M47 and N47 (DZ)not specified
GS6-53DZ and GS6-53BZ (6-speed)E60, E61, E90 and other modelsM57N, M57N2, N54up to 1200 hp / 1600 Nm
S6S-420G (Getrag 6-speed)E46 M3S54up to 1050 hp / 1100 Nm

For the S5D gearboxes, Adamat recommends MTF oil. The GS6-53 comes in two versions: with a centring spigot that locates in a bearing in the crankshaft, or with the bearing in the input shaft of the gearbox. If your gearbox is not in the list, choose “Other gearbox” and put the code in the note field. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: BMV8-SCCS-5057
  • Engine: BMW M60, M62, S62, N62 (V8)
  • Maximum torque: 650 Nm
  • Adapter plate: duraluminium 2017A, with opening for the crankshaft sensor
  • Flywheel: single-mass, AlZnMg+Ti, fully CNC-machined, 7.9 kg, starter ring gear with trigger ring, replaceable friction surface made of GJS600 nodular cast iron
  • Clutch disc: 240 mm, rigid, LUK 8090S lining with Kevlar
  • Pressure plate: SACHS with SAC mechanism (E90 3.0d)
  • Included: adapter plate, flywheel, clutch disc, pressure plate, release bearing, bolts for flywheel, adapter and gearbox

Installation and delivery

The adapter plate goes between the V8 block and the gearbox. The crankshaft sensor sits in the opening of the adapter and reads the trigger ring on the flywheel, so the engine electronics keep receiving the crankshaft signal. The bolts for flywheel, adapter and gearbox are included in the set.

Choose your gearbox when ordering. If you know which GS6-53 version you have, or want to tell us something about your chassis or a different engine inclination, use the note field. Adamat makes the set to order. The lead time is 5 to 7 weeks.

A BMW V8 behind a manual BMW gearbox, with the crankshaft sensor in its place and a clutch that handles up to 650 Nm.

Why choose this BMW V8 clutch kit?

In a V8 swap, everything revolves around the connection between engine and gearbox. Adamat supplies it as one package: adapter, flywheel with trigger ring and clutch come from the same workshop and are matched to each other. Adamat Performance has been building clutches for race, rally, drift and drag cars for more than 15 years and, for heavier engines, also has Kevlar versions up to 780 Nm and multi-plate clutches up to 2400 Nm.

Frequently asked questions

Does the crankshaft sensor of my M62 or N62 still work with this set?

Yes. The adapter plate has an opening for the crankshaft sensor and the flywheel has a trigger ring on the starter ring gear.

Which gearboxes can I choose?

When ordering, you choose from the S5D 5-speed gearboxes, the GS5-39DZ, the GS6-37BZ and GS6-37DZ, the GS6-53BZ and GS6-53DZ and the S6S-420G from the E46 M3. If your gearbox is not listed, choose “Other gearbox” and state the code in the note field.

Does this BMW V8 clutch kit also fit the S62 from the E39 M5?

Yes, this BMW V8 clutch kit fits the M60, M62, S62 and N62. Do keep the maximum of 650 Nm in mind. For more torque, Adamat can make a version with a 100% Kevlar disc up to 780 Nm; please contact us for this.

What is the lead time?

Adamat makes the set to order for the gearbox you choose. Allow 5 to 7 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight17 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M60/M62/S62/N62 clutch kit 650 Nm for BMW gearboxes”
EN

Your Shopping cart

Close