Adamat Nissan CA18DET swap kit for BMW ZF 8HP45 from N20/N26

€641,22 Incl. VAT

Adamat Nissan CA18DET swap kit for BMW ZF 8HP45 from N20/N26

Kit to connect a Nissan CA18DET to the BMW ZF 8HP45 from the N20 and N26. The kit contains a 2.9 kg AlZnMg+Ti billet flywheel, designed for up to 1000 Nm and with a ring gear for the original Nissan starter motor, a 17.5 mm AW7075 adapter plate and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, with anodising approx. 2 weeks longer.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, the gearbox code of your 8HP, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-287 Category: Brand:

Description

Adamat Nissan CA18DET swap kit for BMW ZF 8HP45 from N20/N26

The CA18DET swap kit 8HP45 from Adamat Performance connects a Nissan CA18DET to the ZF 8HP45 automatic from BMWs with the N20 or N26 engine. Adamat describes the kit as suitable for both a standard CA18DET and a CA18DET with more hp than standard.

The kit contains a billet flywheel and an adapter plate. The flywheel weighs 2.9 kg, is made of AlZnMg+Ti with the strength of 42CrMo4 steel and is designed for a maximum of 1000 Nm. The ring gear on it fits the original Nissan starter motor.

The adapter plate is 17.5 mm thick and made of AW7075 (Fortal) aluminium. What is special is that the same adapter also fits other 8HP gearboxes with a different flywheel, so you can switch gearboxes later.

Key benefits

  • Nissan CA18DET on the BMW 8HP45 from the N20 and N26
  • 2.9 kg billet flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
  • Designed for a maximum of 1000 Nm
  • Ring gear for the original Nissan starter motor
  • 17.5 mm AW7075 (Fortal) adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Adapter also usable for other 8HP gearboxes, with a different flywheel
  • Bolts for flywheel, adapter and gearbox included
  • Installation manual as a PDF from Adamat

Suitable for

Engine: Nissan CA18DET

Gearbox in this kit: BMW ZF 8HP45 (GA8HP45) from the N20 and N26

According to Adamat, after changing the flywheel the adapter plate also fits these gearboxes:

ZF 8HPGearbox codeFrom BMW with engine
8HP45GA8HP45N55
8HP45RGA8HP45RS55 (according to Adamat from the M235i)
8HP70GA8HP70N57, N57N
8HP75GA8HP75XN57, N57N
8HP50 / 8HP50ZGA8HP50ZB58
8HP76GA8HP76ZS58
8HP75ZGA8HP75ZB57
8HP51ZGA8HP51ZB48, B46
8HP45ZGA8HP45XB47C20, B47D20

The flywheel in this kit is intended for the 8HP45 from the N20 and N26. If you want to use the adapter with a different gearbox, enter the gearbox code in the note field. We will ask Adamat which flywheel you then need.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-CA18-8HP45N20
  • Engine: Nissan CA18DET
  • Gearbox: BMW ZF 8HP45 (GA8HP45) from the N20 and N26
  • Flywheel: billet, AlZnMg+Ti, 2.9 kg, with ring gear for the original Nissan starter motor
  • Maximum torque: 1000 Nm
  • Adapter plate: AW7075 (Fortal) aluminium, 17.5 mm thick
  • Included: flywheel, adapter plate and bolts for flywheel, adapter and gearbox
  • Manual: installation manual as a PDF

Installation and delivery

The billet flywheel mounts on the crankshaft of the CA18DET, the adapter plate between the block and the bell housing of the 8HP45. The bolts for flywheel, adapter and gearbox are included in the kit and Adamat has a PDF manual for the installation.

When ordering, you choose whether the aluminium parts are anodised. In the note field you provide, for example, your chassis, the gearbox code of your 8HP or a different engine tilt. Adamat makes the kit to order. Allow a lead time of 5 to 7 weeks, with anodising approximately 2 weeks extra.

A CA18DET on the 8HP45 from the N20 and N26, with a billet flywheel up to 1000 Nm and an adapter that also fits other 8HP gearboxes.

Why choose this CA18DET swap kit 8HP45?

This kit is matched to the 8HP45 from the N20 and N26, with a light 2.9 kg billet flywheel designed for up to 1000 Nm. Because the adapter plate also fits other 8HP gearboxes when you change the flywheel, you keep the option of using a different gearbox later.

Frequently asked questions

Which gearbox is the CA18DET swap kit 8HP45 for?

The CA18DET swap kit 8HP45 is made for the ZF 8HP45 (GA8HP45) from BMWs with the N20 or N26 engine.

Can I also use the adapter with a different 8HP?

According to Adamat, yes, after changing the flywheel. The gearboxes are listed in the table above. Enter your gearbox code in the note field and we will ask which flywheel you need.

How much torque can the flywheel handle?

The billet flywheel is designed for a maximum of 1000 Nm.

What do I choose when ordering?

Whether the aluminium parts are anodised. There is also a note field for your chassis, gearbox code or other requirements.

What is the lead time?

Adamat makes the kit to order. The lead time is 5 to 7 weeks, with anodising approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Nissan CA18DET swap kit for BMW ZF 8HP45 from N20/N26”
EN

Your Shopping cart

Close