Description
Adamat GM LS/LT twin-disc clutch STAGE5 1700 Nm for Mitsubishi Pajero Evolution 3.5 V6 gearbox
This LS Pajero Evolution swap kit from Adamat Performance connects a Chevrolet LS or LT V8 to the manual gearbox of the Mitsubishi Pajero Evolution 3.5 V6. The heart of the set is a twin-disc clutch in STAGE5 version: two sintered 240 mm Performance discs and a SACHS Racing pressure plate, together good for 1700 Nm.
Adamat made this kit for powerful off-road vehicles that compete in cross-country rallies, where high torque, heat and heavy use come together. The adapter plate is milled from AL7075, the 7.9 kg flywheel from the light aerospace alloy AlZnMg+Ti.
When ordering, you choose which LS or LT engine you have. Adamat needs that engine version to put the set together correctly.
Key benefits
- STAGE5 up to 1700 Nm with two 240 mm discs
- Sintered MIKODA lining on both Performance discs, for heavy use
- SACHS Racing pressure plate 883082.001243
- AL7075 adapter plate, an aluminium alloy that is stronger than common structural steel
- 7.9 kg AlZnMg+Ti flywheel with ring gear and replaceable friction surface made of GJS600 nodular cast iron
- Intermediate plate made of heat-treated steel, resistant to high temperatures and distortion
- Patented damping and spring centring of the intermediate plate: no rattling and smooth shifting
- Centring pin and installation manual for the twin-disc clutch
- Dynamically balanced as a complete clutch
Suitable for
Engine: GM Chevrolet LS1, LS2, LS3, LS7, LS9, LQ4, LT1 and LT2
Gearbox: manual gearbox of the Mitsubishi Pajero Evolution 3.5 V6
If you have another LS or LT variant, such as an LQ9, choose “Other LS or LT engine” and enter the code in the note field. We will then check with Adamat what is possible. A release bearing is not included in this set.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: MITPAEV-LSQT-TCST5
- Engine: GM Chevrolet LS1, LS2, LS3, LS7, LS9, LQ4, LT1, LT2
- Gearbox: Mitsubishi Pajero Evolution 3.5 V6, manual
- Maximum torque: 1700 Nm (STAGE5)
- Adapter plate: AL7075 aluminium
- Flywheel: single-mass, AlZnMg+Ti, CNC-milled, 7.9 kg, with ring gear and replaceable friction surface made of GJS600 nodular cast iron
- Clutch discs: 2x 240 mm Performance, sintered MIKODA lining
- Intermediate plate: heat-treated steel
- Pressure plate: SACHS Racing 883082.001243
- Release bearing: not included
- Bolts: grade 12.9 flywheel bolts, bolts for adapter and gearbox
- Included: adapter plate, flywheel, 2 clutch discs, intermediate plate, pressure plate, centring pin, bolts and installation manual (as a PDF by e-mail)
Installation and delivery
The adapter plate goes between the LS or LT block and the bell housing of the Pajero gearbox. Use the centring pin to align the two discs before tightening the pressure plate. You receive the installation manual for the twin-disc clutch as a PDF by e-mail. Flywheel, discs and pressure plate are balanced together.
Choose your engine when ordering. If you want to tell Adamat anything else, such as your chassis or a different engine tilt, use the note field. Adamat makes the set to order. The lead time is 5 to 7 weeks.
1700 Nm from an LS or LT to the Pajero Evolution gearbox, built for cross-country and heavy off-road work.
Why choose this LS Pajero Evolution swap kit?
In cross-country rallies a clutch has a tough time: long special stages, frequent pulling away under load and high temperatures. Adamat combines sintered discs with a SACHS Racing pressure plate and an intermediate plate made of heat-treated steel. The AlZnMg+Ti flywheel dissipates the heat from the friction surface, where a steel flywheel can distort when overheated. The patented damping keeps the intermediate plate quiet, and springs pull it away from the discs after disengaging, so you can shift quickly even with a twin-disc clutch.
Frequently asked questions
Which engines is this set intended for?
For the Chevrolet LS1, LS2, LS3, LS7, LS9, LQ4, LT1 and LT2. You choose your engine when ordering. If you have another variant, choose “Other LS or LT engine” and enter the code in the note field.
Why does the LS Pajero Evolution swap kit have sintered discs?
The LS Pajero Evolution swap kit is a STAGE5 set for 1700 Nm and heavy off-road use. Sintered linings are made for high loads, and together with the SACHS Racing pressure plate the two discs handle that torque.
Is a release bearing included?
No, a release bearing is not included in this set.
What is included in the set?
Adapter plate, flywheel with ring gear, two sintered 240 mm clutch discs, intermediate plate, SACHS Racing pressure plate, centring pin, grade 12.9 flywheel bolts, bolts for adapter and gearbox and an installation manual as a PDF.
What is the lead time?
Adamat makes the set to order. Allow 5 to 7 weeks.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.