Description
Adamat BMW M57 306D1/M57N 306D2 complete swap kit for BMW ZF 8HP45/50/70/75
This M57 swap kit BMW 8HP from Adamat Performance is a complete set to mate the BMW M57 (306D1) from the E46 and E39 or the M57N (306D2) from the E46 to an eight-speed ZF 8HP automatic. This gives the M57 the eight-speed automatic from later BMWs.
Unlike a separate adapter plate, this set includes its own flywheel that connects directly to the torque converter of the 8HP. It is made of AlZnMg+Ti, weighs 3.2 kg and has a built-in starter ring gear that fits the original BMW starter motor of your engine. The 22 mm adapter plate is made of AW7075-T651.
When ordering you choose whether you want the aluminium parts anodised. You use the note field for your chassis, engine code, the type code of your gearbox or other information for Adamat.
Key benefits
- Complete set: adapter plate, flywheel and mounting bolts for flywheel, adapter and gearbox
- Flywheel of only 3.2 kg, for direct connection to the 8HP torque converter
- AlZnMg+Ti alloy with, according to Adamat, the strength of 42CrMo4 steel
- Up to 2000 Nm engine torque, according to Adamat designed for heavy loads such as quarter-mile drag racing
- Built-in starter ring gear that fits the original BMW starter motor
- 22 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Widely applicable: Adamat lists eight 8HP versions, from the 8HP45Z to the 8HP76Z
Suitable for
Engine
| Engine | Engine code | Chassis according to Adamat |
|---|---|---|
| BMW M57 | 306D1 | E46, E39 |
| BMW M57N | 306D2 | E46 |
Gearbox: BMW ZF 8HP eight-speed automatic
| BMW ZF 8HP gearbox | Type code | Original BMW engine |
|---|---|---|
| ZF 8HP70 | GA8HP70 | N57, N57N |
| ZF 8HP75 | GA8HP75X | N57, N57N |
| ZF 8HP50Z | GA8HP50Z | B58 (B58B30) |
| ZF 8HP76Z | GA8HP76Z | S58 (S58B30) |
| ZF 8HP75Z | GA8HP75Z | B57 (B57B30) |
| ZF 8HP51Z | GA8HP51Z | B48 (B48B20) |
| ZF 8HP51Z | GA8HP51Z | B46 (B46B20) |
| ZF 8HP45Z | GA8HP45Z | B47 (B47C20, B47D20) |
All gearboxes in the table have 8 speeds. If you are unsure whether your gearbox is included, put the type code in the note field; we will then submit it to Adamat.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM-M57D1-D2-8HP-SF
- Engine: BMW M57 306D1 (E46, E39) and M57N 306D2 (E46)
- Gearbox: BMW ZF 8HP (see table)
- Flywheel: AlZnMg+Ti, 3.2 kg, with built-in starter ring gear, for direct connection to the torque converter
- Maximum engine torque: 2000 Nm
- Adapter plate: AW7075-T651 aluminium, 22 mm thick
- Included: adapter plate, flywheel and mounting bolts for flywheel, adapter and gearbox
- Fitting instructions: available from Adamat
Fitting and delivery
The flywheel goes on the crankshaft of the M57 and the torque converter of the 8HP is bolted directly to it, without an original flexplate in between. The starter ring gear is already in the flywheel, so you keep the original starter motor of your engine. The adapter plate connects the block to the gearbox housing. Adamat has fitting instructions for this set.
The set is made to order. Allow a lead time of 5 to 7 weeks. Anodising adds about 2 weeks.
A BMW M57 behind a modern ZF 8HP, with a 3.2 kg flywheel that fits directly on the torque converter and uses the original starter motor.
Why choose this M57 swap kit BMW 8HP?
Adamat Performance has more than 15 years of experience in motorsport and makes adapters for many engine and gearbox combinations with the ZF 8HP. This set is complete: flywheel, adapter plate and bolts are matched to each other and you keep the original starter motor. With eight listed 8HP versions, you have a wide choice of gearboxes from later BMW models.
Frequently asked questions
What is the difference from a separate M57 adapter plate?
This complete set has its own AlZnMg+Ti flywheel that connects directly to the torque converter of the 8HP. So you do not need an original flexplate.
Which engines does this M57 swap kit BMW 8HP fit?
This M57 swap kit BMW 8HP is made for the BMW M57 306D1 from the E46 and E39 and the M57N 306D2 from the E46.
Can I use the original starter motor?
Yes, according to Adamat the starter ring gear in the flywheel fits the original BMW starter motor of your engine.
Which choices do I make when ordering?
You choose whether the aluminium parts are anodised (about 2 weeks extra lead time). In the note field you enter, for example, your chassis, the engine code, the type code of your 8HP gearbox or other requests.
What is the lead time?
Adamat makes the set to order; the lead time is 5 to 7 weeks. If you choose anodising, it takes about 2 weeks longer.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.