Description
Adamat BMW M57N2 306D3/306D4/306D5 swap kit for Dodge ZF 8HP70/8HP90
With the M57 swap kit Dodge 8HP from Adamat Performance you put a BMW M57N2 diesel (306D3, 306D4 or 306D5) with the large bellhousing behind the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger and Hellcat. The kit replaces the factory flywheel of the BMW automatic with Adamat’s own, much stronger flywheel.
According to Adamat, the original flywheel has a limited torque capacity and often cracks above 800 Nm. The one-piece flywheel in this kit is made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel, and is designed for up to 2000 Nm. It weighs 3.4 kg and has an integrated starter ring gear.
The set also contains a reduction ring for the shaft of the 8HP torque converter, a 29 mm AW7075-T651 aluminium adapter plate and all mounting bolts.
Key benefits
- BMW M57N2 diesel on the Dodge 8HP: 8HP70 and 8HP90 from Challenger, Charger and Hellcat
- One-piece flywheel for up to 2000 Nm, where according to Adamat the factory flywheel often cracks above 800 Nm
- 3.4 kg flywheel made of AlZnMg+Ti, with the strength of 42CrMo4 steel
- Integrated starter ring gear on the flywheel
- Reduction ring for the converter shaft, depending on the year of manufacture of the 8HP
- 29 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
- Bolts for flywheel, adapter and gearbox included
- Fitting instructions as a PDF from Adamat
Suitable for
Engine: BMW M57N2 306D3, 306D4 and 306D5 with large bellhousing (Adamat also mentions the M57N in the text)
Gearbox: ZF 8HP70 and 8HP90 from the Dodge Challenger, Charger and Hellcat
| Engine code | Chassis according to Adamat |
|---|---|
| M57N2 306D3, 306D4, 306D5 (large bellhousing) | E90, E91, E92, E93, E60, E61, E65, E66, E67, F01, E83, E53, E70, E71 |
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Part number: ADM_M57D3D5-8HPDODGE
- Engine: BMW M57N2 306D3, 306D4 and 306D5, large bellhousing
- Gearbox: ZF 8HP70 and 8HP90 (Dodge Challenger, Charger, Hellcat)
- Flywheel: one-piece, AlZnMg+Ti, 3.4 kg, with integrated starter ring gear, designed for up to 2000 Nm
- Reduction ring: for the shaft of the 8HP torque converter, depending on the year of manufacture
- Adapter plate: AW7075-T651 aluminium, 29 mm thick
- Included: flywheel, reduction ring, adapter plate and bolts for flywheel, adapter and gearbox
- Manual: fitting instructions as a PDF
Fitting and delivery
The Adamat flywheel goes on the crankshaft of the M57N2 in place of the factory flywheel of the BMW automatic. The adapter plate connects the block to the bellhousing of the Dodge 8HP, and with the reduction ring the torque converter fits the year of manufacture of your gearbox. All bolts and a PDF manual come with the kit.
When ordering, you choose whether the aluminium parts are anodised. In the note field you can, for example, give the year of manufacture or the code of your 8HP, your chassis or a different engine tilt. Adamat makes the kit to order; the lead time is 5 to 7 weeks. With anodising it takes approximately 2 weeks longer.
An M57N2 diesel with the 8HP from a Challenger or Charger, on a flywheel that Adamat designed for up to 2000 Nm.
Why choose this M57 swap kit Dodge 8HP?
If you build an M57N2 with more horsepower than stock, the original flywheel is a weak point above 800 Nm according to Adamat. This kit tackles that with a one-piece flywheel for up to 2000 Nm and connects the engine to the 8HP70 or 8HP90 from the Dodge models. Flywheel, adapter and reduction ring come from one manufacturer and are matched to each other.
Frequently asked questions
Which engines is the M57 swap kit Dodge 8HP for?
The M57 swap kit Dodge 8HP is made for the BMW M57N2 with engine code 306D3, 306D4 or 306D5 and the large bellhousing. Adamat lists chassis such as the E90, E60, E70, E71, E83 and F01.
Why a dedicated flywheel?
According to Adamat, the factory flywheel of the BMW automatic has a limited torque capacity and often cracks above 800 Nm. The flywheel in this kit is designed for up to 2000 Nm.
What is the reduction ring for?
The shaft of the 8HP torque converter differs by year of manufacture. With the reduction ring from the set, the torque converter fits your version.
What do I choose when ordering?
Whether the aluminium parts are anodised. There is also a note field for the year of manufacture or the code of your 8HP, your chassis or other requests.
What is the lead time?
Adamat makes the kit to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks extra.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.











Reviews
There are no reviews yet.