Description
Adamat BMW N52/N53/N54/N55/S55 complete swap kit for BMW ZF 8HP45/50/70/75
This N55 swap kit BMW 8HP from Adamat Performance is the complete solution for putting a BMW N52, N53, N54, N55 or S55 behind a ZF 8HP eight-speed automatic. Instead of the original flexplate, you get a one-piece flywheel designed for projects up to 2000 Nm.
The flywheel is made of AlZnMg+Ti with the strength of 42CrMo4 steel and weighs 3.8 kg. The fitted ring gear works with the original starter motor of your engine, and the torque converter can be fastened with 6 or 4 bolts. It comes with a 24.5 mm AW7075-T651 aluminium adapter plate.
All bolts for flywheel, adapter and gearbox are included in the kit, as is the mounting hardware for the torque converter. According to Adamat, the S55 is supported in all power versions.
Key advantages
- Complete kit: flywheel, adapter plate and all bolts, no original flexplate needed
- Flywheel up to 2000 Nm, intended for very powerful projects
- Light: 3.8 kg, one-piece AlZnMg+Ti with the strength of 42CrMo4 steel
- Ring gear fitted, matching the original starter motor
- Torque converter with 6 or 4 bolts, so the 8HP45Z with the 4-bolt converter from the N47 also fits
- Adapter plate made of 24.5 mm AW7075-T651, according to Adamat stronger than S355 and C45 steel (1.0503)
- Widely applicable: N52, N53, N54, N55 and all S55 versions on six 8HP versions
Suitable for
Engine: BMW N52B25A, N52B30A, N53B25, N53B30, N54B30A, N55B30A and S55 (all power versions)
| ZF 8HP | Gearbox code | From BMW with engine |
|---|---|---|
| 8HP70 | GA8HP70 | N57, N57N |
| 8HP75 | GA8HP75X | N57, N57N |
| 8HP50Z | GA8HP50Z | B58B30 |
| 8HP75Z | GA8HP75Z | B57B30 |
| 8HP51Z | GA8HP51Z | B48B20 |
| 8HP51Z | GA8HP51Z | B46B20 |
| 8HP45Z | GA8HP45X | B47C20, B47D20 |
| 8HP45Z | GA8HP45X | N47 (torque converter with 4 bolts) |
If you are unsure about your combination, enter the engine code and the gearbox code in the note field.
Technical specifications
- Manufacturer: Adamat Performance (Poland)
- Item number: ADM-N5X-8HP4575-SF
- Engine: BMW N52, N53, N54, N55 and S55
- Gearbox: BMW ZF 8HP45, 8HP50, 8HP51, 8HP70 and 8HP75 (see table)
- Flywheel: one-piece, AlZnMg+Ti, 3.8 kg, designed for a maximum of 2000 Nm, with fitted ring gear
- Torque converter mounting: 6 or 4 bolts
- Adapter plate: AW7075-T651 aluminium, 24.5 mm thick
- Included: flywheel, adapter plate, bolts for flywheel, adapter and gearbox, mounting hardware and bolts for the torque converter
- Manual: installation manual as a PDF
Installation and delivery
The flywheel mounting differs per crankshaft. That is why you choose your crankshaft version when ordering: the N54 with 8-bolt crankshaft, or the N54 from 2009, N55 and S55 with 6-bolt crankshaft. If you have an N52 or N53, choose that option and add your engine code in the note field.
You also choose whether the aluminium parts are anodised. In the note field you can also enter your gearbox code, chassis or a different engine tilt. Adamat makes the kit to order. The lead time is 5 to 7 weeks, about 2 weeks longer with anodising.
No more flexplate as the weak link: a 3.8 kg flywheel for up to 2000 Nm between your N5x and the 8HP.
Why choose this N55 swap kit BMW 8HP?
If you are building an N54, N55 or S55 with far more horsepower than stock, you want a connection to the 8HP that can handle that torque. Adamat supplies the flywheel and adapter as one matching kit, with a ring gear for your original starter motor and a converter mounting for 6 or 4 bolts. Everything comes from one manufacturer in Poland, so we can check questions about your project directly with Adamat.
Frequently asked questions
Which crankshaft version should I choose?
If your N54 has a crankshaft with 8 bolts, choose “N54 with 8-bolt crankshaft”. For the N54 from 2009, the N55 and the S55 with 6-bolt crankshaft, choose the second option. With an N52 or N53, choose the N52/N53 option and add your engine code in the note.
How much torque can the N55 swap kit BMW 8HP handle?
According to Adamat, the flywheel of the N55 swap kit BMW 8HP is designed for very powerful projects up to 2000 Nm.
Does my original starter motor still fit?
Yes, according to Adamat the fitted ring gear is suitable for the original starter motor of your engine.
What do I choose when ordering?
Your crankshaft version and whether the aluminium parts are anodised. In the note field you can enter your engine code, gearbox code, chassis or a different engine tilt.
What is the lead time?
Adamat makes the kit to order; allow 5 to 7 weeks. With anodising it takes about 2 weeks longer.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.











Reviews
There are no reviews yet.