Shop

Description

Ford Fiesta ST Mk7 V-Maxx Big Brake Kit 330 mm 4-piston

With this big brake kit Fiesta ST Mk7, V-Maxx fits 330 mm two-piece brake discs and 4-piston calipers made of forged aluminium to the front axle of the Ford Fiesta ST Mk7 (JA8/JR8) with 134 to 147 kW. It is the 330 mm version alongside the 290 mm kit 20 FO290 03, and it comes complete with sport brake pads with TÜV approval and vehicle-specific adapters.

For track use, this is the kit with the most reserve: larger discs and aluminium parts that dissipate heat quickly. As a result, the braking behaviour stays consistent even after a series of fast laps. V-Maxx Autosport is a Dutch manufacturer and the kit has a TÜV certificate according to §19.3, which means it is also approved for use on public roads.

Key benefits

• 330 mm brake discs, two-piece and grooved, for more braking capacity on the track
• Forged aluminium 4-piston calipers, red (RAL 3020) as standard, black, blue or yellow at extra cost
• High-carbon steel on ultra-light floating aluminium bells
• Directional cooling channels in the discs for fast heat dissipation
• Less fade under repeated hard braking
• V-Maxx sport brake pads with TÜV approval included as standard
• Plug and play with adapters for the original rubber brake hoses
• TÜV §19.3 and a 2-year warranty

Suitable for

Ford Fiesta ST Mk7 (JA8/JR8), 06-2008 to 12-2016, 134 to 147 kW

• Ford Fiesta ST Mk7 (JA8/JR8), 06-2008 to 12-2016: all versions from 134 to 147 kW; note: check wheel clearance with the fitment template (WFC)

Minimum wheel size: 17 inch. For this application, V-Maxx expressly points out that you should check the clearance with the fitment template (WFC); a wheel spacer is sometimes required.

Technical specifications

• Manufacturer: V-Maxx Autosport, Netherlands
• Part number: 20 FO330 01
• Brake discs: 330 mm, two-piece, grooved, high-carbon steel with floating aluminium bell
• Calipers: 4-piston, forged aluminium, red (RAL 3020) as standard
• Brake pads: V-Maxx sport brake pads with TÜV approval
• Minimum wheel size: 17 inch
• Approval: TÜV certificate according to §19.3
• Axle: front axle
• Included: calipers, brake discs with bells, brake pads and vehicle-specific adapters

Fitting and delivery

Fit the kit according to the V-Maxx fitting instructions supplied, including the tightening torques stated in them. The kit only fits cars with original steering knuckles. Keep wheel cleaner away from the brake kit, as it attacks the aluminium; clean it with a mild soap. If you drive a lot and hard on the track, V-Maxx recommends removing the dust seals from the calipers.

You can extend the kit with V-Maxx Steelflex steel braided brake hoses 460 mm (set of 2) with PTFE inner hose and TÜV approval, Ferodo brake fluid (500 ml), a V-Maxx wear indicator set, a different caliper colour (black, blue or yellow at extra cost; red RAL 3020 is standard) and an extra set of Ferodo FDSR216 DS Performance brake pads. These DS pads do not have TÜV approval. Delivery time: 4 to 7 days.

The Fiesta ST Mk7 is fast enough for the track; with 330 mm discs and forged 4-piston calipers, now the brakes are too.

Why choose this big brake kit Fiesta ST Mk7?

If the car is mainly used on the track and 17 inch wheels are not a problem, the 330 mm kit is the logical choice over the 290 mm version. The larger disc gives more braking torque, and because the caliper, bracket and bell are made of aluminium, which conducts heat about five times better than steel, the kit cools down quickly. The directional cooling channels in the discs help with this. The result is a pedal that feels the same session after session, with TÜV approval and a 2-year warranty.

Frequently asked questions

Does the big brake kit Fiesta ST Mk7 fit behind my wheels?

The big brake kit Fiesta ST Mk7 requires wheels of at least 17 inch. Always check the clearance with the fitment template (WFC); a wheel spacer is sometimes required. If you drive on 15 or 16 inch wheels, take a look at the 290 mm kit 20 FO290 03.

Is the big brake kit Fiesta ST Mk7 suitable for a car with more power than standard?

Yes, definitely. A Fiesta ST Mk7 with more power than standard benefits most from this kit: 330 mm discs and 4-piston calipers give more braking power and much less fade. The kW limits in the application list refer to the original factory output, and with an officially approved power upgrade the TÜV approval remains valid.

Does V-Maxx also offer a kit for the rear axle?

No. V-Maxx only supplies kits for the front axle, because about 90% of the braking power comes from there.

What is the delivery time?

The delivery time is 4 to 7 days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.