Shop

Description

Ford Fiesta ST Mk8 V-Maxx Big Brake Kit 330 mm 4-piston (140 mm caliper mounting)

This big brake kit Fiesta ST Mk8 from V-Maxx is the 330 mm kit for the Ford Fiesta ST Mk8 (JHH) with 147 kW, from 01-2017, in the version with 140 mm caliper mounting hole spacing and reinforced suspension (steering knuckle no. 2480640 / 642). It combines 330 mm two-piece, grooved brake discs with 4-piston calipers made of forged aluminium.

You get more braking power and much less fade under repeated hard braking, and the kit comes complete with V-Maxx sport brake pads with TÜV approval and the vehicle-specific adapters. V-Maxx Autosport is a Dutch manufacturer and the kit has a TÜV certificate according to §19.3, so it is approved for use on public roads.

Key benefits

• Specifically for the ST Mk8 with reinforced suspension and 140 mm caliper mounting
• 330 mm brake discs: two-piece, grooved, high-carbon steel
• Forged aluminium 4-piston calipers, red (RAL 3020) as standard
• Ultra-light floating aluminium bells and directional cooling channels for fast heat dissipation
• Consistent pedal under repeated hard braking
• Plug and play: adapters for the original rubber brake hoses and sport brake pads with TÜV approval are included
• TÜV §19.3 and a 2-year factory warranty

Suitable for

Ford Fiesta ST Mk8 (JHH), from 01-2017, 147 kW, with 140 mm caliper mounting

• Ford Fiesta ST Mk8 (JHH), from 01-2017: Fiesta ST 147 kW; only for versions with 140 mm caliper mounting hole spacing and only for versions with reinforced suspension (steering knuckle no. 2480640 / 642); check wheel clearance with the fitment template (WFC)

Minimum wheel size: 17 inch. Check with the fitment template (WFC) whether the wheels clear the calipers; a wheel spacer is sometimes required.

Technical specifications

• Manufacturer: V-Maxx Autosport, Netherlands
• Part number: 20 FO330 24
• Version: for 140 mm caliper mounting hole spacing (reinforced suspension)
• Brake discs: 330 mm, two-piece, grooved, high-carbon steel with floating aluminium bell
• Calipers: 4-piston, forged aluminium, red (RAL 3020) as standard
• Brake pads: V-Maxx sport brake pads with TÜV approval
• Minimum wheel size: 17 inch
• Approval: TÜV §19.3
• Axle: front axle
• Included: calipers, brake discs with bells, brake pads and vehicle-specific adapters

Fitting and delivery

Fit the kit according to the V-Maxx fitting instructions supplied and observe the tightening torques stated in them. The kit only fits original steering knuckles, in this version those with no. 2480640 / 642. Clean the brake kit with a mild soap and do not use wheel cleaner, as it attacks the aluminium. For heavy track use, V-Maxx recommends removing the dust seals from the calipers.

Options: V-Maxx Steelflex steel braided brake hoses 420 mm with M10x1.5 connection (set of 2), with PTFE inner hose and TÜV approval; Ferodo brake fluid (500 ml); a V-Maxx wear indicator set; a different caliper colour (red RAL 3020 as standard, black, blue or yellow at extra cost); an extra set of Ferodo FDSR216 DS Performance brake pads (without TÜV approval). Delivery time: 4 to 7 days.

Reinforced suspension, 140 mm mounting, 330 mm discs: a kit that matches the Fiesta ST Mk8 with steering knuckle no. 2480640 / 642 exactly.

Why choose this big brake kit Fiesta ST Mk8?

If your ST has the reinforced suspension, the 120 mm kit does not fit and this is the 330 mm version you need. The caliper, bracket and bell are made of aluminium, which conducts heat about five times better than steel, and the discs have directional cooling channels. As a result, the kit cools down quickly and the braking behaviour stays consistent even in long sessions. With TÜV approval and a 2-year warranty, it is a complete kit for road and track.

Frequently asked questions

How do I know which version I need?

Look at the steering knuckle and the caliper mounting hole spacing. This kit (20 FO330 24) is for the ST with reinforced suspension (steering knuckle no. 2480640 / 642) and 140 mm hole spacing. For the ST with 120 mm hole spacing there is 20 FO330 19, and the 290 mm kit 20 FO290 20 fits wheels from 15 inch.

Which wheels fit the big brake kit Fiesta ST Mk8?

The big brake kit Fiesta ST Mk8 requires wheels of at least 17 inch. Check the clearance with the fitment template (WFC); a wheel spacer is sometimes required.

Is the big brake kit Fiesta ST Mk8 suitable for a car with more power than standard?

Yes, definitely. A Fiesta ST Mk8 with more power than standard benefits most from this kit: 330 mm discs and 4-piston calipers give more braking power and much less fade. The kW value in the application list (147 kW) refers to the original factory output, and with an officially approved power upgrade the TÜV approval remains valid.

Can I use this kit on the track?

Yes. The aluminium parts and the directional cooling channels keep the braking behaviour consistent under repeated hard braking. An extra set of Ferodo FDSR216 DS Performance brake pads is available as an option, without TÜV approval.

What is the delivery time?

The delivery time is 4 to 7 days.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.