Description
BMW E46 Caliper Adapter ABS for Hydraulic Handbrake (Weld-in Version)
With this E46 caliper adapter you mount a second brake caliper on each rear wheel of a BMW E46 with rear disc brakes. You connect a hydraulic handbrake to that extra caliper, while the ABS sensor simply stays in use. That way you do not have to sacrifice your ABS for a serious drift handbrake.
The set is intended for drift and track cars on which the handbrake has to work separately from the normal brake system. Because the adapter is welded onto the control arm, you get a solid base that stays in place even when the handbrake is used hard and often.
Contents
Key benefits of this E46 caliper adapter
- Second brake caliper on each rear wheel for a hydraulic handbrake
- ABS sensor is retained, in a newly cut-out seat
- No bolt needed for the sensor: the caliper carrier clamps it lightly
- Set of 2: one adapter for the left and one for the right
- Made of 8 mm thick S355 steel, sandblasted
- Laser-cut for an accurate fit
Suitable for
BMW 3 Series E46 with rear disc brakes
- BMW E46 with disc brakes on the rear axle and a rear ABS sensor
Technical specifications
- Item number: 0246
- Application: weld-in adapter for an extra rear brake caliper, ABS is retained
- Material: S355 steel, sandblasted
- Thickness: 8 mm
- Production: laser-cut
- Mounting: welded onto the rear control arm, at the location of the ABS sensor
- Contents: 2 adapters (left and right)
- Weight: 0.54 kg
Installation and delivery
The E46 caliper adapter is welded onto the control arm, at the spot where the ABS sensor is originally located. First remove the sensor. Then fit the caliper carrier, the caliper and the brake disc, put the adapter in position and weld it on while everything is assembled. That way you can be sure the extra caliper lines up properly with the disc. Weld in short sections and let it cool in between, so that the control arm does not distort.
After welding, take everything apart and cut out a seat for the sensor. If necessary, grind the sensor housing down slightly and saw off the eye with which the sensor was originally bolted in place. The sensor is then lightly clamped by the fitted carrier. To operate it, you can use the YDC Classic Premium hydraulic handbrake, for example. You will find more solutions in our dual caliper brackets category.
A dedicated brake caliper for your handbrake, without your ABS sensor having to make way.
Why choose this E46 caliper adapter?
With many conversion kits for a second brake caliper, the ABS sensor has to go. This E46 caliper adapter is designed precisely so that the sensor stays in place, in a new seat. So you keep working ABS for the road or for competitions where that is desired, and still get a fully-fledged, separate handbrake caliper. The thick, sandblasted steel and the welded mounting make the solution sturdy and durable.
Frequently asked questions
Does my ABS keep working with the E46 caliper adapter?
Yes. The sensor is retained and goes back into a new, cut-out seat.
Does the sensor have to be bolted in place?
No. The fitted caliper carrier clamps the sensor lightly, so it cannot fall out.
How many adapters are in the set?
Two: one for the left and one for the right.
Does this fit an E46 with rear drum brakes?
No. The adapter is intended for an E46 with disc brakes on the rear axle.
Can I fit this myself?
Yes, if you have welding experience. If you are unsure, have it done by an experienced welder or a workshop that knows brake systems.
What material are the adapters made of?
8 mm thick S355 steel, laser-cut and sandblasted.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.











Reviews
There are no reviews yet.