BMW E90 E92 E82 Brake Caliper Adapter for Hydraulic Handbrake (Weld-in Model)

€48,76 Incl. VAT

BMW E90 E92 E82 Brake Caliper Adapter for Hydraulic Handbrake (Weld-in Model)

Weld-in E82 brake caliper adapter set for a second rear brake caliper on the BMW E82, E88, E90, E92 and E93, intended for a hydraulic handbrake. The set consists of two adapters of 10 mm thick sandblasted S235 steel, laser-cut and milled. Please note: the rear ABS sensor is lost and the rear anti-roll bar cannot stay in place.

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: 0163 Category:

Description

BMW E90 E92 E82 Brake Caliper Adapter for Hydraulic Handbrake (Weld-in Model)

With this E82 brake caliper adapter set you fit a second brake caliper per wheel at the rear of your BMW 1 Series or 3 Series. You connect the extra caliper to a hydraulic handbrake, so the handbrake works completely separately from the footbrake. The set fits the E82, E88, E90, E92 and E93.

The adapters are intended for drift cars and competition cars that need a reliable hydraulic handbrake. This is a weld-in model: you weld the adapters onto the rear wheel carrier. Important to know in advance: the rear ABS sensor is lost and the rear anti-roll bar cannot stay in place with these adapters.

Key benefits of the E82 brake caliper adapter

  • Second brake caliper per rear wheel, specifically for a hydraulic handbrake
  • Handbrake separate from the footbrake, so no shared caliper
  • 10 mm thick S235 steel, sandblasted
  • Laser-cut and milled for accurate dimensions
  • Set of two: one adapter for the left and one for the right
  • Welded onto the wheel carrier, so a fixed and stiff connection
  • Weight of the set: 0.5 kg

Suitable for

BMW 1 Series E8X and 3 Series E9X

  • BMW 1 Series E82 coupé and E88 convertible
  • BMW 3 Series E90 saloon
  • BMW 3 Series E92 coupé and E93 convertible

Technical specifications

  • Item number: 0163
  • Application: fitting an extra rear brake caliper for a hydraulic handbrake
  • Material: S235 steel, sandblasted
  • Thickness: 10 mm
  • Production: laser-cut and milled
  • Mounting: welded onto the wheel carrier, in the place of the ABS sensor
  • Contents: 2 adapters, left and right
  • Weight: 0.5 kg

Installation and delivery

The E82 brake caliper adapter is welded onto the rear wheel carrier, exactly where the ABS sensor normally sits. So that sensor has to come out. In addition, the seat of the ABS sensor has to be ground down slightly, otherwise the bracket of the extra caliper will not fit in between. The photos show what this looks like.

Leave the welding to someone with experience of load-bearing parts. Clean the wheel carrier thoroughly beforehand, set the adapter in the correct position relative to the brake disc and treat the weld against rust afterwards. If you are unsure whether the adapter and the brake caliper you want to use go together, contact us beforehand.

All brackets for a second brake caliper can be found in the dual caliper brackets category. If you drive an older 3 Series, there is also an adapter for extra brake calipers on the E46.

A dedicated brake caliper for the handbrake, firmly welded onto the wheel carrier of your E8X or E9X.

Why choose this E82 brake caliper adapter?

A hydraulic handbrake that works through the standard rear caliper shares its force with the footbrake. With a separate caliper per wheel you have a system that is meant only for the handbrake. These adapters are made of 10 mm thick steel, laser-cut and then milled, and once welded they are rock solid. A logical step for any serious drift E9X or E8X.

Frequently asked questions

Which models does this adapter fit?

The E82 brake caliper adapter fits the BMW E82, E88, E90, E92 and E93. If you are unsure about the E87, contact us beforehand.

Can I keep the rear anti-roll bar?

No. With these adapters, the rear anti-roll bar cannot stay in place.

Does the rear ABS still work after fitting?

The adapter goes in the place of the rear ABS sensor. That sensor has to be removed for it.

Does the adapter have to be welded?

Yes, the E82 brake caliper adapter is a weld-in model. You weld the adapter onto the rear wheel carrier.

How many adapters are in the set?

Two: one for the left side and one for the right side.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight0,50 kg
Car make

BMW

Model

E90, E91, E92, E93

Reviews

There are no reviews yet.

Be the first to review “BMW E90 E92 E82 Brake Caliper Adapter for Hydraulic Handbrake (Weld-in Model)”
EN

Your Shopping cart

Close