Description
BMW E46 Engine mounts reinforced M50 M52 M52TU M54 steel
These steel E46 engine mounts are the brackets used to suspend an M50, M52, M52TU or M54 engine in the BMW E46. They are intended for engine swaps and replace the original mounts, which are also almost impossible to find second-hand.
The brackets are designed to be stronger than the originals, so cracking, the most common problem with the standard mounts, no longer occurs. You get a pair: one for the left and one for the right side. That makes them a logical choice for anyone building a six-cylinder into an E46, or anyone who wants to replace cracked or fatigued original brackets on an existing engine in one go with steel engine mounts that can take a knock.
Contents
Key benefits of these steel E46 engine mounts
- Suitable for the M50, M52, M52TU and M54 in the E46
- Ideal for swaps, where original mounts are hard to find
- Stronger than original, designed to prevent cracking
- Made of 5 mm thick S355 steel
- CNC-cut and bent
- Powder-coated for protection against rust
- Supplied as a set of 2
Suitable for
BMW 3 Series E46 with an inline six-cylinder engine
- BMW E46 with M50 engine (swap)
- BMW E46 with M52 or M52TU
- BMW E46 with M54
Technical specifications
- Item number: 0218
- Type: engine mount brackets, left and right
- Material: S355 steel
- Thickness: 5 mm
- Production: CNC-cut and bent
- Finish: powder-coated
- Contents: set of 2 pieces
Installation and delivery
The steel E46 engine mounts take the place of the original engine mounts between the engine block and the engine rubbers. Support the engine with a jack or an engine support beam before you remove the old mounts. Fit the new brackets, put the engine rubbers on and tighten all bolts to the specified torque.
After the first drive, check that the engine is clear of the body and that all bolts are still tight. Since you are working on the engine mounting anyway, check the condition of the engine rubbers at the same time. You will find more mounts and rubbers in our engine mounts category.
5 mm steel engine mounts for your E46 swap, so cracked original brackets are a thing of the past.
Why choose steel E46 engine mounts?
With a swap, you often depend on original engine mounts that are hard to find and can crack after years of use. These brackets made of 5 mm S355 steel solve both problems: you get a new set, designed to be stronger and neatly powder-coated. Steel E46 engine mounts give your swap a solid base, so you can focus on the rest of the project instead of searching for good used brackets.
Frequently asked questions
Which engines are these mounts for?
The steel E46 engine mounts are intended for the M50, M52, M52TU and M54 in a BMW E46.
How many pieces do I get?
You get a set of 2: one pair of steel E46 engine mounts for left and right.
Are the engine rubbers included?
No, this is for the steel brackets. You buy the engine rubbers separately.
What material are they made of?
The steel E46 engine mounts are made of 5 mm thick S355 steel, CNC-cut and bent, and then powder-coated.
Can I also use them without a swap?
Yes. Even if your E46 already has an M52TU or M54, you can replace the original mounts with these steel E46 engine mounts, for example if the old brackets are cracked.
Why are they stronger than the original?
They are designed to prevent cracking, the most common problem with the original brackets.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.









Reviews
There are no reviews yet.