Description
AST Multipoint Weld-in Roll Cage Nissan Silvia S15 Coupé V3 NASCAR door
The Multipoint S15 V3 NASCAR is a full roll cage from AST Roll Cages for the two-door Nissan Silvia S15, welded in at ten points and built for drift use.
The difference from the standard V3 lies in the doors. Instead of a single straight door bar, several curved tubes run through the door opening, together following the shape of the door. In drifting, contact from the side is the rule rather than the exception, and a cluster of tubes like this spreads the impact over a much larger area than a single bar. Combined with the ten-point anchorage, you get a structure that protects both the chassis and the driver.
The rear structure has a V design. The cage is supplied unpainted.
Key benefits
- NASCAR door bars, several curved tubes per door
- Built for drifting, where side contact is part of the game
- Ten welded mounting points, the heaviest anchorage in the AST range
- V design rear structure
- E355 steel, 45 mm main hoop and 40 mm for the remaining tubes
- Gussets made from 3 mm steel at the welded mounting points
- Custom-made via laser scan, so the door tubes sit snugly in the door
Suitable for
Nissan Silvia S15, two-door Coupé
- S15 Spec-R and Spec-S, rear-wheel drive
- Roofs without a sunroof
- Roofs without headlining
- Drifting and competitive track use
Technical specifications
- Manufacturer: AST Roll Cages
- Part number: CMBN03888
- Material: E355 steel
- Main hoop tube diameter: 45 mm
- Secondary structure tube diameter: 40 mm
- Foot and reinforcement plates: 3 mm steel, custom-made for each car
- Mounting: 10 welded mounting points on the bodyshell
- Door design: NASCAR door bars
- Weight: 210 kg
- Finish: unpainted
- Sunroof: for roofs without a sunroof
- Headlining: for roofs without headlining
- Rear anchorage: in the rear suspension area
- Rear structure layout: V design
- Included: weld-in kit, gussets, reinforcement plates, bolts, washers, nuts, documentation, fitting instructions and sticker set
Fitting and delivery
NASCAR door bars take up a good deal of the door, so the original door card does not go back in and getting in takes some practice. Before welding, check that you still have enough shoulder room with your chosen bucket seat. Then: strip the car, take the ten welded mounting points back to bare metal, weld.
Every cage is custom-built after you order, with a delivery time of 15 to 35 working days.
Ten welded mounting points under the car and a cluster of curved tubes in each door.
Why choose this Multipoint S15 V3 NASCAR?
Anyone who drifts competitively drives close to the wall and close to their opponent. A single door bar absorbs an impact at one point; the NASCAR version spreads that same force over several tubes that follow the shape of the door. In a welded-in structure with ten anchorage points, that force also goes straight into the chassis. For an S15 that competes every week, that is the difference that counts.
Frequently asked questions
Is this a half or a full roll cage?
A full roll cage, welded at ten points and extending into the front compartment.
What exactly are NASCAR door bars?
Several curved tubes in the door instead of a single straight bar. They follow the shape of the door and spread a side impact over a larger area.
What is the difference from the regular V3?
The Multipoint S15 V3 NASCAR has NASCAR door bars. The standard V3 has a conventional door bar.
Can I still get in and out normally?
It takes practice. Expect a noticeably tighter opening than with a cage that has a single door bar.
Is this roll cage homologated?
AST does not state an FIA homologation number for this item. The cage is intended for track and competition use; check the regulations of your own organiser.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.








Reviews
There are no reviews yet.