Description
The MTS Stance Audi 80 B4 quattro Gold is a height-adjustable coilover kit from MTS Technik for the Audi 80 B4 with four-wheel drive (quattro), model years 1991 to 1996. Stance is the lowest and firmest setup from MTS Technik, for those who want the wheel tight under the wheel arch.
On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.
Key benefits
- Zinc-plated damper bodies with a yellow zinc coating to protect against rust
- Lower by 0 to 60 mm, front and rear independently adjustable
- Eibach springs of 70 N/mm front and 40 to 80 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- Front camber plates included, so you can adjust the camber
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Stance Audi 80 B4 quattro Gold fits the following versions:
- Audi 80 B4 Sedan and Avant (type 8C2/8C5, 09/1991 to 01/1996): 2.0 E 16V quattro, 2.0 E quattro, 2.3 E quattro, 2.6 quattro, 2.8 quattro, S2 quattro, 2.0 quattro, RS2 quattro
Note for the MTS Stance Audi 80 B4 quattro Gold: axle load: maximum 1100 kg front and maximum 1200 kg rear; check your car’s vehicle type plate.
Technical specifications
- Product: MTS Stance Audi 80 B4 quattro Gold
- Manufacturer: MTS Technik
- Article number: MTSGWAU72-S
- EAN: 5903855621404
- Version: Stance, Gold (zinc-plated steel)
- Lowering: front 0 to 60 mm, rear 0 to 60 mm (depending on the model)
- Springs (Eibach): GWFE93 with 70 N/mm front, GWFE20HA with 40 to 80 N/mm rear
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front and rear via threaded damper body
- Camber plates: included at the front
- Included: complete front and rear set with springs and height adjustment, plus front camber plates
- TÜV certificate: yes
- Weight: 29.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Stance Audi 80 B4 quattro Gold replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Stance Audi 80 B4 quattro Gold combines zinc-plated damper bodies, Eibach springs of 70 and 40-80 N/mm and up to 60 mm of lowering for the Audi 80 B4 with four-wheel drive (quattro).
Why choose the MTS Stance Audi 80 B4 quattro Gold?
With the MTS Stance Audi 80 B4 quattro Gold you choose the lowest possible car with direct, firm handling; the stiffer springs keep the body steady, even with a large lowering. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies. With the included camber plates you set the camber, which with a large lowering means less tyre wear and more grip.
Frequently asked questions
Does this kit also fit a version without four-wheel drive?
No. The MTS Stance Audi 80 B4 quattro Gold is made for the four-wheel-drive (quattro) versions. MTS Technik has separate kits for the front-wheel drive versions.
What is the difference between Comfort, Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (30-55 and 40-80 N/mm), Street (60 and 40-80 N/mm) and Stance (70 and 40-80 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Stance Audi 80 B4 quattro Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the Audi 80 B4
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.