Volkswagen Caddy 3/4 (04-20) MTS Technik Street coilover kit Gold (front axle load 1076 to 1235 kg)

€495,04 Incl. VAT

The MTS Street Caddy 3 Gold is a height-adjustable coilover kit with zinc-plated damper bodies for the Volkswagen Caddy 3/4 (not for 4×4).

  • Lowers 35 to 90 mm at the front and 35 to 90 mm at the rear
  • Eibach springs, TÜV certificate and 2 years warranty with no mileage limit
  • Delivery time 4 to 7 working days while manufacturer stock lasts

Also available in another versionClick a kit to view it.

●Goldzinc-plated steelStreetall-round
MTS Street Caddy 3 Gold coilover kit
Lowering F/R (mm)35‑90 / 35‑90
Springs F/R (N/mm)‑ / ‑
Price€599,00this kit
●Inoxstainless steelStreetall-round
MTS Street Caddy 3 Inox coilover kit
Lowering F/R (mm)35‑90 / 35‑90
Springs F/R (N/mm)‑ / ‑
Price€699,00View ›

Available on back-order|Estimated delivery time: 4 to 7 working days

SKU: MTSGWVW34 Category: Brand:

Description

The MTS Street Caddy 3 Gold is a height-adjustable coilover kit from MTS Technik for the Volkswagen Caddy 3/4, model years 2004 to 2020. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use.

On the Gold version, the steel parts have a yellow zinc coating and the aluminium parts are black anodised.

Key benefits

  • Zinc-plated damper bodies with a yellow zinc coating to protect against rust
  • Lower by 35 to 90 mm, front and rear independently adjustable
  • Eibach springs, matched to this set
  • Gas-oil twin-tube dampers that stay stable even under intensive use
  • hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
  • TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street Caddy 3 Gold fits the following versions:

  • Volkswagen Caddy 3 MPV and Van (03/2004 to 03/2016): 1.2 TSI, 1.4, 1.6, 1.6 TDI, 1.9 D, 1.9 TDI, 2.0 EcoFuel, 2.0 SDI, 2.0 TDI, 2.0 TDI 16V
  • Volkswagen Caddy 4 MPV and Van (type SAB/SAJ/SAA/SAH, 05/2015 to 12/2020): 1.0 TSI, 1.2 TSI, 1.4 TSI, 1.6, 1.6 TDI, 2.0 TDI

Note: not suitable for versions with four-wheel drive (4Motion). Axle load: 1076 to 1235 kg front and maximum 1300 kg rear; check your car’s vehicle type plate.

Technical specifications

  • Product: MTS Street Caddy 3 Gold
  • Manufacturer: MTS Technik
  • Article number: MTSGWVW34
  • EAN: 5903357784683
  • Version: Street, Gold (zinc-plated steel)
  • Lowering: front 35 to 90 mm, rear 35 to 90 mm
  • Height adjustment: front via threaded damper body, rear via separate adjuster element
  • Camber plates: not included
  • Included: complete front and rear set with springs and height adjustment
  • TÜV certificate: yes
  • Weight: 36.9 kg
  • Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street Caddy 3 Gold replaces the original dampers and springs and fits on the original mounting points.

  • The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
  • When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
  • Only for cars with a single leaf spring at the rear.
  • If the car has a double rear leaf spring, it must be converted to a single leaf spring: VW Caddy 3 (up to 05/2015) 2K5 511 151 N, VW Caddy 4 (from 05/2015) 2K5 511 151 AA, VW Caddy Maxi 2K3 511 151 E.
  • The rear height adjustment must be fitted exactly as described in the manual.
  • After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street Caddy 3 Gold combines zinc-plated damper bodies and up to 90 mm of lowering for the Volkswagen Caddy 3/4.

Why choose the MTS Street Caddy 3 Gold?

With the MTS Street Caddy 3 Gold you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. The Gold version is the most affordable way to get an MTS Technik coilover kit, with a zinc coating that protects well against rust. If you also drive in winter, take a look at the Inox version with stainless steel damper bodies.

Frequently asked questions

Does this kit also fit a four-wheel-drive (4Motion) version?

No. The MTS Street Caddy 3 Gold is not suitable for the four-wheel-drive versions.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street Caddy 3 Gold is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the Caddy 3

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight25 kg
Car make

Volkswagen

Model

Caddy

Reviews

There are no reviews yet.

Be the first to review “Volkswagen Caddy 3/4 (04-20) MTS Technik Street coilover kit Gold (front axle load 1076 to 1235 kg)”
EN

Your Shopping cart

Close