Shop

The MTS Street E61 Touring Inox is a height-adjustable coilover kit from MTS Technik for the BMW E61 Touring, model years 2004 to 2010. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.

On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance. This kit only replaces the dampers and springs of the front axle; the rear axle stays original.

Key benefits

• Stainless steel damper bodies, resistant to road salt and moisture
• Lower by 20 to 60 mm on the front axle
• Eibach springs of 70 N/mm front
• Gas-oil twin-tube dampers that stay stable even under intensive use
• hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
• TÜV certificate and 2 year warranty with no mileage limit

Suitable for

The MTS Street E61 Touring Inox fits the following versions:

• 5 Series E61 Touring (03/2004 to 12/2010): 520d, 520i, 523i, 525d, 525i, 530d, 530i, 535d, 545i, 550i

Note: not suitable for versions with four-wheel drive (xDrive). Only for cars without EDC (electronic damping control). Axle load: maximum 1070 kg front and maximum 1300 kg rear; check your car’s vehicle type plate.

Technical specifications

• Product: MTS Street E61 Touring Inox
• Manufacturer: MTS Technik
• Article number: XMTSGWBM36
• EAN: 5903855652514
• Version: Street, Inox (stainless steel)
• Lowering: front 20 to 60 mm, rear stays original
• Springs (Eibach): GWFE93 with 70 N/mm front
• Helper springs: GWHE02 (20 N/mm)
• Height adjustment: front via threaded damper body
• Camber plates: not included
• Included: complete front set with springs and height adjustment
• TÜV certificate: yes
• Weight: 24.9 kg
• Warranty: 2 years with no mileage limit

Fitting and delivery

The MTS Street E61 Touring Inox replaces the original dampers and springs and fits on the original mounting points.

• The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
• When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
• After lowering, have the wheel alignment checked, because camber and toe change as well.

Delivery: 4 to 7 working days while manufacturer stock lasts.

The MTS Street E61 Touring Inox combines stainless steel damper bodies, Eibach springs of 70 N/mm and up to 60 mm of lowering for the BMW E61 Touring.

Why choose the MTS Street E61 Touring Inox?

With the MTS Street E61 Touring Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.

Frequently asked questions

Does this kit also fit a four-wheel-drive (xDrive) version?

No. The MTS Street E61 Touring Inox is made for the rear-wheel-drive versions.

What is the difference between Street and Stance?

All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Street (70 N/mm) and Stance (90 N/mm). Street is the standard. Stance is the firmest and the lowest.

What is the difference between Gold and Inox?

Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.

How long does delivery take?

The MTS Street E61 Touring Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.

Other MTS Technik sets for the E61 Touring

• BMW E61 Touring (04-10) MTS Technik coilover kit (for NIVO)
• BMW E61 Touring (04-10) MTS Technik coilover kit (NIVO conversion)
• BMW E60/E61 (01-10) MTS Technik coilover kit (front axle only, front camber plates)
• BMW E61 Touring (04-10) MTS Technik coilover kit (for NIVO, front camber plates)
• BMW E61 Touring (04-10) MTS Technik coilover kit (NIVO conversion, front camber plates)