Shop

Description

Front Strut Brace BMW E32

This E32 front strut bar gives the front end of your BMW more stiffness. The brace is designed for the 7 Series E32 and fits every engine version of this model. With a straight steel profile between the two front strut towers, you keep the front end of this big saloon tight, even on poor roads and in fast corners.

The E32 is a luxury touring car, but its length and weight ask a lot of the body around the towers. If you drive a 7 Series as a modern classic, or convert it into an eye-catching drift car, you will notice that a brace brings calm back to the front end. It also gives the engine bay a professional look.

Key benefits of the BMW E32 front strut bar

• Made for the 7 Series E32, all engine versions
• Straight profile of flat oval steel, 40 x 20 mm
• 3 mm wall for a stiff connection
• Laser-cut mounting plates, then CNC-bent
• Pressed mounting holes for durability
• MIG/MAG-welded by a certified welder
• Tested in drifting and rallying under tough conditions

Suitable for

BMW 7 Series E32

• BMW 7 Series E32, all engine versions

Not sure about your version? Just send us your chassis number and we will check it for you.

Technical specifications

• Item number: 0011
• Position: front
• Main profile: flat oval steel of 40 x 20 mm
• Wall thickness: 3 mm
• Mounting plates: laser-cut, CNC-bent, holes pressed
• Welding method: MIG/MAG in dedicated welding jigs
• Finish: black powder coating
• Weight: 2.84 kg

Installation and delivery

The plates at both ends of the brace fit over the top of the front strut towers. On a car of this age, first check that the towers are free of rust or small cracks, and clean the contact surfaces thoroughly. Put the brace in place, screw the bolts in by hand and then tighten them evenly. Use a torque wrench for this, so that both sides of the E32 front strut bar are tightened with the same force.

Leave the E32 on its wheels while tightening. Looking for more? In our strut braces category you will find braces for many other models. For the 8 Series from the same period there is the strut brace for the BMW E31 840 and 850.

A big BMW that turns into the corner crisply: that is what this brace makes possible.

Why choose this BMW E32 front strut bar?

Suspension reinforcements for the 7 Series E32 are few and far between. This brace was made specifically for the front end of the BMW E32, fits all engine versions and has been tested in drifting and rallying. With a 3 mm steel profile and pressed mounting holes you get a solid part, with a black finish that suits any paint colour.

Frequently asked questions

Does the brace fit all E32 engines?

Yes, the E32 front strut bar is suitable for all engine versions of the BMW E32.

What does an E32 front strut bar do?

It connects the two front strut towers, so the front end flexes less in corners and the steering responds more directly.

How much does it weigh?

The E32 front strut bar weighs 2.84 kg.

What material is the brace made of?

Steel, with a flat oval profile of 40 x 20 mm and a wall thickness of 3 mm.

Is it available in black or in another colour?

The brace is powder-coated black. That finish blends in neatly in the engine bay and suits any paint colour.

Does a strut brace make sense on a modern classic that is not driven much?

Yes. You will notice a stiffer front end on your BMW E32 even on relaxed drives: the car feels tighter over bumps and in long corners. And if you tackle the suspension later, the basics are already in place.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.