Adamat Mazda MX-5/Ford Duratec/Ecoboost swap kit for BMW ZF 8HP45 from N20/N26

€713,49 Incl. VAT

Adamat Mazda MX-5/Ford Duratec/Ecoboost swap kit for BMW ZF 8HP45 from N20/N26

Swap kit from Adamat Performance to connect a Mazda MX-5 Duratec 2.0, 2.3 or 2.5 or a Ford Ecoboost 2.3 to a BMW ZF 8HP45 from the N20 or N26. With a billet AlZnMg+Ti flywheel (3.1 kg, designed for up to 1000 Nm) with starter ring gear for the Mazda Miata starter motor, a 20 mm AW7075 adapter plate and all bolts. When ordering, you choose the engine tilt (10 degrees or vertical) and optional anodising. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Choose how the engine will sit in the car.

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-306 Category: Brand:

Description

Adamat Mazda MX-5/Ford Duratec/Ecoboost swap kit for BMW ZF 8HP45 from N20/N26

With this Duratec swap kit 8HP45 N20 from Adamat Performance you connect a Mazda MX-5 Duratec 2.0, 2.3 or 2.5 or a Ford Ecoboost 2.3 to the BMW ZF 8HP45 automatic from the N20 and N26. According to Adamat, the set is suitable for turbocharged engines and for stock engines.

The set consists of a 3.1 kg billet flywheel, made of a light AlZnMg+Ti alloy with the strength of 42CrMo4 steel and designed for a maximum of 1000 Nm. The flywheel has a starter ring gear for the original Mazda Miata starter motor; Adamat states that the set works with starter motor M000T36371. You also get a 20 mm AW7075 (fortal) adapter plate and all bolts for flywheel, adapter and gearbox.

When ordering, you choose the engine tilt (10 degrees or vertical) and whether the aluminium parts are anodised. There is a note field for other requests.

Key benefits

  • Duratec or Ecoboost on a BMW 8HP45: for the 8HP45 from the N20 and N26
  • 3.1 kg billet flywheel made of AlZnMg+Ti with the strength of 42CrMo4 steel
  • Designed for up to 1000 Nm, for turbocharged and stock engines
  • Starter ring gear for the Mazda Miata starter motor, the set works with starter motor M000T36371
  • 20 mm AW7075 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Choice of engine tilt: 10 degrees or vertical
  • Adapter also usable with the 8HP45 from the N55 and the 8HP45R, with a different flywheel (not in this set)
  • All bolts and fitting instructions as a PDF
  • Optional anodising as an extra finish

Suitable for

Engine: Mazda MX-5 Duratec 2.0, 2.3 and 2.5, Ford Ecoboost 2.3

Gearbox: BMW ZF 8HP45 (GA8HP45) from the N20 and N26

GearboxGearbox codeOriginal BMW engineWith this set
BMW ZF 8HP45GA8HP45N20, N26Complete, fits directly
BMW ZF 8HP45GA8HP45N55Adapter fits, different flywheel needed
BMW ZF 8HP45RGA8HP45RS55 (M235i)Adapter fits, different flywheel needed

Adamat states that the set works with the original starter motor M000T36371.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Part number: ADM-DUR-8H45N2X55
  • Engine: Mazda MX-5 Duratec 2.0, 2.3 and 2.5, Ford Ecoboost 2.3
  • Gearbox: BMW ZF 8HP45 (GA8HP45) from the N20 and N26
  • Flywheel: billet AlZnMg+Ti, 3.1 kg, designed for up to 1000 Nm, with starter ring gear for the Mazda Miata starter motor
  • Starter motor: original M000T36371
  • Adapter plate: AW7075 aluminium (fortal), 20 mm thick
  • Engine tilt: 10 degrees or vertical, selectable when ordering
  • Included: flywheel with starter ring gear, adapter plate and bolts for flywheel, adapter and gearbox
  • Fitting instructions: PDF from Adamat

Fitting and delivery

The adapter plate goes between the Duratec or Ecoboost block and the gearbox housing of the 8HP45, and the flywheel goes on the crankshaft. Adamat makes the adapter to suit the engine tilt you choose. Fitting instructions as a PDF are available for this set.

The set is made to order. The lead time is 5 to 7 weeks. If you have the parts anodised, it takes approximately 2 weeks longer, because this finish is done externally. Put other requests or details about your car in the note field.

Duratec or Ecoboost 2.3 up front, BMW 8HP45 behind it: a light flywheel up to 1000 Nm and an adapter in the engine tilt you choose.

Why choose this Duratec swap kit 8HP45 N20?

Adamat Performance has been working in motorsport for more than 15 years. Flywheel, starter ring gear and adapter are designed for this combination. Because the adapter plate also fits the 8HP45 from the N55 and the 8HP45R, you can later switch to one of those gearboxes with a different Adamat flywheel.

Frequently asked questions

Which engines fit this set?

This Duratec swap kit 8HP45 N20 is made for the Mazda MX-5 Duratec 2.0, 2.3 and 2.5 and the Ford Ecoboost 2.3.

Does the set also fit the 8HP45 from the N55?

The adapter plate also fits the 8HP45 from the N55 and the 8HP45R from the M235i, but that requires a different flywheel that is not in this set. Contact us if you have such a gearbox.

Which engine tilt should I choose?

You choose 10 degrees or vertical, depending on how the engine will sit in your car. If in doubt or if you have a different tilt, describe your situation in the note field.

Which starter motor do I need?

The starter ring gear is intended for the original Mazda Miata starter motor. Adamat states that the set works with starter motor M000T36371.

What is the lead time?

Adamat makes the set to order. Allow 5 to 7 weeks, with anodising approximately 2 weeks longer.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Mazda MX-5/Ford Duratec/Ecoboost swap kit for BMW ZF 8HP45 from N20/N26”
EN

Your Shopping cart

Close