Adamat BMW M57/M57N 306D1/306D2 swap kit for Dodge ZF 8HP70/8HP90

€802,24 Incl. VAT

Adamat BMW M57/M57N 306D1/306D2 swap kit for Dodge ZF 8HP70/8HP90

Swap kit to connect a BMW M57 306D1 (E46, E39) or M57N 306D2 (E46, small bell housing) to the ZF 8HP70 or 8HP90 from the Dodge Challenger, Charger and Hellcat. The kit contains a one-piece AlZnMg+Ti flywheel (3.4 kg, designed for up to 2000 Nm) with ring gear, a 29 mm AW7075-T651 adapter plate, an adapter ring and all bolts. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks, approx. 2 weeks longer with anodising.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example the year of manufacture of your 8HP (for the correct adapter ring), your engine code, chassis, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-279 Category: Brand:

Description

Adamat BMW M57/M57N 306D1/306D2 swap kit for Dodge ZF 8HP70/8HP90

This M57 306D1 swap kit Dodge from Adamat Performance connects a BMW M57 306D1 (E46, E39) or M57N 306D2 (E46, small bell housing) to the ZF 8HP70 or 8HP90 eight-speed automatic from the Dodge Challenger, Charger and Hellcat.

The most important part is a one-piece AlZnMg+Ti flywheel of 3.4 kg with integrated ring gear. It is designed for up to 2000 Nm and replaces the original flywheel of the BMW automatic. According to Adamat, that original flywheel can only handle limited torque and often cracks above about 800 Nm.

The kit also includes a 29 mm AW7075-T651 adapter plate, an adapter ring for the torque converter shaft and the bolts for flywheel, adapter and gearbox.

Key advantages

  • BMW diesel on the Dodge 8HP: M57 306D1 and M57N 306D2 on the 8HP70 or 8HP90
  • Flywheel designed for up to 2000 Nm, one-piece AlZnMg+Ti with the strength of 42CrMo4 steel
  • Light: 3.4 kg, with integrated ring gear
  • Replaces the original automatic flywheel, which according to Adamat often cracks above approx. 800 Nm
  • 29 mm AW7075-T651 adapter plate, according to Adamat stronger than S355 and C45 steel (1.0503)
  • Adapter ring for the torque converter shaft, matched to the year of manufacture of the 8HP
  • All bolts for flywheel, adapter and gearbox

Suitable for

EngineVersion according to Adamat
BMW M57 306D1E46, E39
BMW M57N 306D2E46, small bell housing
GearboxFrom
ZF 8HP70Dodge Challenger, Charger, Hellcat
ZF 8HP90Dodge Challenger, Charger, Hellcat

For the M57N2 306D3, 306D4 and 306D5, Adamat has a separate Dodge kit. If you are unsure about your engine or gearbox, enter the codes in the note field.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: ADM-M57D1D2-8HPDODGE
  • Engine: BMW M57 306D1 and M57N 306D2
  • Gearbox: ZF 8HP70 and 8HP90 (Dodge)
  • Flywheel: one-piece, AlZnMg+Ti, 3.4 kg, designed for up to 2000 Nm, with integrated ring gear
  • Adapter plate: AW7075-T651 aluminium, 29 mm thick
  • Adapter ring: for the torque converter shaft of the 8HP, depending on the year of manufacture
  • Included: flywheel, adapter plate, adapter ring, bolts for flywheel, adapter and gearbox
  • Manual: installation manual as a PDF

Installation and delivery

The Adamat flywheel takes the place of the original flywheel on the M57 crankshaft. The 29 mm adapter plate connects the block to the Dodge 8HP, and the adapter ring makes sure the torque converter shaft sits properly in the flywheel. Which ring you need depends on the year of manufacture of the gearbox.

When ordering, you choose whether the aluminium parts are anodised. In the note field you enter the year of manufacture of your 8HP, and if needed your chassis or a different engine tilt. Adamat makes the kit to order. Allow a lead time of 5 to 7 weeks, about 2 weeks longer with anodising.

A BMW M57 diesel behind the 8HP from the Dodge, with a flywheel that Adamat designed for up to 2000 Nm.

Why choose this M57 306D1 swap kit Dodge?

On an M57 with more horsepower than stock, the original automatic flywheel is the limiting factor according to Adamat. This kit replaces it with a one-piece flywheel designed for up to 2000 Nm, and supplies the adapter and the adapter ring for the Dodge 8HP with it. You get everything from one manufacturer in Poland, so we can check questions about your project directly with Adamat.

Frequently asked questions

Which M57 engines is the M57 306D1 swap kit Dodge for?

According to Adamat, the M57 306D1 swap kit Dodge is for the M57 306D1 from the E46 and E39 and the M57N 306D2 from the E46 with small bell housing. There is a separate kit for the 306D3 to 306D5.

Why is an adapter ring included?

The adapter ring adapts the torque converter shaft of the 8HP to the flywheel. Which ring is needed depends on the year of manufacture of the gearbox, so state it in the note field.

What do I choose when ordering?

You choose whether the aluminium parts are anodised (externally, about 2 weeks extra). In the note field you enter the year of manufacture of your 8HP and, if needed, your chassis or a different engine tilt.

What is the lead time?

Adamat makes the kit to order: 5 to 7 weeks. Anodising adds about 2 weeks.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat BMW M57/M57N 306D1/306D2 swap kit for Dodge ZF 8HP70/8HP90”
EN

Your Shopping cart

Close