Adamat Nissan RB swap kit adapter + flywheel for BMW ZF GA8HP90 (N74 V12)

€675,09 Incl. VAT

Adamat Nissan RB swap kit adapter + flywheel for BMW ZF GA8HP90 (N74 V12)

Swap kit to connect a Nissan RB20, RB25, RB26 or RB30 to the BMW ZF GA8HP90Z automatic from the V12 N74: adapter plate made of AW7075-T651 aluminium, a one-piece AlZnMg+Ti flywheel with ring gear up to 2000 Nm and all bolts. The original Nissan automatic flywheel is then no longer needed. When ordering, you choose whether the aluminium parts are anodised. Lead time 5 to 7 weeks.

Available on back-order|Estimated delivery time: 5 to 7 weeks

Optional anodised coating on the aluminium parts. This is done externally and adds about 2 weeks to the lead time.

For example your chassis, engine code, a different engine tilt or anything else Adamat should take into account.

SKU: ADM-228 Category: Brand:

Description

Adamat Nissan RB swap kit adapter + flywheel for BMW ZF GA8HP90 (N74 V12)

This RB 8HP90 N74 swap kit from Adamat Performance connects a Nissan RB20, RB25, RB26 or RB30 to the ZF GA8HP90Z, the eight-speed automatic that BMW fitted behind the V12 N74. The kit contains an aluminium adapter plate, a one-piece flywheel with ring gear and the bolts for flywheel, adapter and gearbox.

The Adamat flywheel takes the place of the original Nissan flywheel for automatics. That original part can only handle limited torque and, according to Adamat, often cracks above 600 Nm. The flywheel in this kit is designed for torques up to 2000 Nm.

When ordering, you choose whether the aluminium parts are anodised. In the note field you can pass on extra information about your project to Adamat.

Key advantages

  • Adapter, flywheel and bolts in one kit for the combination of RB engine and GA8HP90Z gearbox
  • Flywheel up to 2000 Nm, made of AlZnMg+Ti, a light alloy with the strength of 42CrMo4 steel
  • Original Nissan automatic flywheel no longer needed, the part that according to Adamat often cracks above 600 Nm
  • Ring gear integrated into the flywheel
  • Adapter plate made of AW7075-T651 (Fortal), an aluminium alloy that is stronger than S355 and C45 steel
  • For all RB variants: RB20, RB25, RB26 and RB30
  • Installation manual available as a PDF from Adamat
  • Optional anodising of the aluminium parts

Suitable for

Engine: Nissan RB20, RB25, RB26 and RB30

Gearbox: BMW ZF GA8HP90Z (8-speed automatic)

ZF gearboxOriginal BMW engineChassis
GA8HP90Z (8-speed)N74 V12F01, F02, F03

If you have a different 8HP gearbox or are unsure whether your gearbox fits, enter the code in the note field when ordering. We will then check with Adamat what is possible.

Technical specifications

  • Manufacturer: Adamat Performance (Poland)
  • Item number: RB-BZF8HP90-N74
  • Engine: Nissan RB20, RB25, RB26, RB30
  • Gearbox: BMW ZF GA8HP90Z, 8-speed automatic (N74 V12, F01, F02, F03)
  • Flywheel: one-piece, AlZnMg+Ti with the strength of 42CrMo4 steel, with integrated ring gear
  • Maximum flywheel torque: 2000 Nm
  • Adapter plate: AW7075-T651 (Fortal), stronger than S355 and C45 (1.0503) steel
  • Included: adapter plate, flywheel with ring gear, bolts for flywheel, adapter and gearbox
  • Installation manual: as a PDF from Adamat

Installation and delivery

The adapter plate goes between the RB block and the ZF gearbox, and the flywheel goes on the RB crankshaft in place of the original automatic flywheel. All bolts for flywheel, adapter and gearbox are included, and Adamat has an installation manual as a PDF.

When ordering, you choose whether you want the aluminium parts anodised. If you want to tell Adamat something, such as your chassis, your engine code or a different engine tilt, use the note field. Adamat makes the kit to order. The lead time is 5 to 7 weeks; anodising adds about 2 weeks.

An RB inline-six behind the ZF automatic from the BMW V12: a flywheel that can handle 2000 Nm and an adapter made of Fortal aluminium, made to order by Adamat.

Why choose this RB 8HP90 N74 swap kit?

In the BMW, this ZF automatic sat behind the V12 N74. With this kit you can put it behind an RB engine without having to design an adapter yourself. On an RB with more horsepower than stock, the original automatic flywheel is often the weak point, and that is exactly the part Adamat replaces with a one-piece flywheel. Adamat Performance has more than 15 years of experience in motorsport and makes the adapter and flywheel itself, so the parts match each other.

Frequently asked questions

Which RB engines fit this kit?

The kit is made for the Nissan RB20, RB25, RB26 and RB30.

Do I still need the original Nissan flywheel?

No. The Adamat flywheel replaces the original Nissan flywheel for automatics. It has an integrated ring gear and is designed for torques up to 2000 Nm.

Does the RB 8HP90 N74 swap kit also fit a different 8HP gearbox?

The RB 8HP90 N74 swap kit is made for the GA8HP90Z from the BMW V12 N74 (F01, F02, F03). Adamat has separate kits for other 8HP gearboxes. If in doubt, enter the code of your gearbox in the note field.

What do I choose when ordering?

You choose whether the aluminium parts are anodised. This is done externally and takes about 2 weeks extra. In the note field you can pass on your chassis, engine code or a different engine tilt.

What is the lead time?

Adamat makes the kit to order. Allow 5 to 7 weeks, about 2 weeks longer with anodising.

Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.

Additional information

Weight12 kg

Reviews

There are no reviews yet.

Be the first to review “Adamat Nissan RB swap kit adapter + flywheel for BMW ZF GA8HP90 (N74 V12)”
EN

Your Shopping cart

Close