Description
BMW E46 Strut Tower Side Reinforcement, Weld-in Set
This E46 strut tower side reinforcement consists of side braces that you weld in along the front strut towers of a BMW 3 Series E46. They make the body around the towers stiffer and reinforce the sheet metal at the point where the front suspension transfers its forces. The braces are welded in from the wing side.
The set is intended for E46 builders who want to make the front of their car stiffer for drifting, circuit work or a heavily loaded road car. If you are opening up the body for welding anyway, these braces add a lot of stiffness for little weight.
Contents
Key benefits of the E46 strut tower side reinforcement
- Stiffer body around the front strut towers
- Reinforces the towers at a point that takes a lot of punishment during hard driving
- Made of S355 steel, 2 mm thick
- Laser-cut and bent on a CNC press brake, so an accurate shape
- Weld-in mounting from the wing side, permanently joined to the body
- Can be made to fit each model year by briefly bending the wing-side part in a vice
- Weight about 1.18 kg
Suitable for
BMW 3 Series E46
- BMW 3 Series E46, front strut towers
- Depending on the model year, the part on the wing side has to be bent slightly
Technical specifications
- Item number: 0115
- Application: side reinforcement of the front strut towers, E46
- Material: S355 steel
- Thickness: 2 mm
- Production: laser-cut, bent on a CNC press brake
- Mounting: welded in from the wing side
- Weight: 1.18 kg
Installation and delivery
The E46 strut tower side reinforcement is welded into the body on the wing side. Dry-fit the braces first. If the part on the wing side does not sit properly, which can differ per model year, you bend it a little in a vice: according to the manufacturer, that is a job of about fifteen seconds.
Leave the welding to someone with experience. Clean the sheet metal down to bare metal beforehand, weld in short sections to prevent distortion and protect the seams against rust afterwards with primer and seam sealer.
You will find more parts to stiffen the body in the chassis and subframe reinforcements category. If you also want to protect the top of the towers, the E46 strut tower reinforcement goes well with this set.
Stiffness starts where the strut meets the body, and that is exactly where this side brace sits.
Why choose an E46 strut tower side reinforcement?
An E46 that has been driven hard for years starts to flex at the front. By connecting the towers at the side to the wing side, you spread the load over more sheet metal and the geometry of the front suspension stays in place better. The steel is thin enough to weld neatly and strong enough to make a real difference.
Frequently asked questions
Can I bolt these braces on?
No. The E46 strut tower side reinforcement is a weld-in set and is welded in from the wing side.
Does the set fit all model years of the E46?
Yes, but on some model years you have to bend the part on the wing side slightly. You do that in a few seconds in a vice.
Which material is used?
The E46 strut tower side reinforcement is made of S355 steel of 2 mm, laser-cut and bent on a CNC press brake.
How much does the set weigh?
The E46 strut tower side reinforcement weighs about 1.18 kg. That is the weight you add at the front, in exchange for a noticeably sturdier structure around the towers.
What do I have to remove beforehand?
Make sure you can weld freely at the strut tower and the inside of the wing. Remove cables, lines and flammable parts nearby or shield them well, and remove paint and sealer where the weld seams will be.
Is this the same as a strut brace?
No. A strut brace connects the two towers across the top and can be removed. These side braces are welded permanently into the body and reinforce the towers themselves.
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.










Reviews
There are no reviews yet.