Description
The MTS Street E91 Touring xDrive Inox is a height-adjustable coilover kit from MTS Technik for the BMW E91 Touring, model years 2004 to 2012. Street is the standard setup from MTS Technik: a good balance between comfort and firmness, for daily use and the occasional track day or drift day.
On the Inox version, the damper bodies are made of stainless steel, so road salt and moisture don’t stand a chance.
Key benefits
- Stainless steel damper bodies, resistant to road salt and moisture
- Lower by 0 to 45 mm, front and rear independently adjustable
- Eibach springs of 60 N/mm front and 100 N/mm rear
- Gas-oil twin-tube dampers that stay stable even under intensive use
- hexaCOIL spring perch: the adjusting nut does not seize up during adjustment
- TÜV certificate and 2 year warranty with no mileage limit
Suitable for
The MTS Street E91 Touring xDrive Inox fits the following versions:
- 3 Series E91 Touring (12/2004 to 12/2012): 320d xDrive, 325i xDrive, 325xi, 330d xDrive, 330i xDrive, 330xd, 330xi, 335i xDrive, 335xi
Note for the MTS Street E91 Touring xDrive Inox: axle load: maximum 1090 kg front and maximum 1200 kg rear; check your car’s vehicle type plate.
Also suitable for versions with M-Technik (M package).
Technical specifications
- Product: MTS Street E91 Touring xDrive Inox
- Manufacturer: MTS Technik
- Article number: XMTSGWBM47
- EAN: 5903855656116
- Version: Street, Inox (stainless steel)
- Lowering: front 0 to 45 mm, rear 0 to 40 mm
- Springs (Eibach): GWFE86 with 60 N/mm front, GWFE14HA with 100 N/mm rear
- Helper springs: GWHE02 (20 N/mm)
- Height adjustment: front via threaded damper body, rear via separate adjuster element
- Camber plates: not included
- Included: complete front and rear set with springs and height adjustment
- TÜV certificate: yes
- Weight: 24.9 kg
- Warranty: 2 years with no mileage limit
Fitting and delivery
The MTS Street E91 Touring xDrive Inox replaces the original dampers and springs and fits on the original mounting points.
- The stated lowering applies relative to the standard suspension. If the car has a factory sport suspension, the lowering will be smaller.
- When fitting, check the clearance between tyre or wheel and the strut: at least 5 mm. If it is less, use approved wheel spacers.
- Tip for adjusting the rear: remove the height adjuster, set the spring seat to the new position and refit the adjuster.
- Sometimes extra original parts are needed for fitting; these are not included in the set.
- After lowering, have the wheel alignment checked, because camber and toe change as well.
Delivery: 4 to 7 working days while manufacturer stock lasts.
The MTS Street E91 Touring xDrive Inox combines stainless steel damper bodies, Eibach springs of 60 and 100 N/mm and up to 45 mm of lowering for the BMW E91 Touring.
Why choose the MTS Street E91 Touring xDrive Inox?
With the MTS Street E91 Touring xDrive Inox you choose the setup MTS Technik itself recommends as standard: enough lowering for a tight stance, and a character that doesn’t become tiring on the road. If you also drive in winter or the car is parked outside, the Inox version pays for itself: stainless steel doesn’t rust, so the thread of the height adjustment doesn’t seize up. If you mainly drive in summer, the Gold version is a more affordable alternative.
Frequently asked questions
Does this kit also fit a rear-wheel-drive version?
No. The MTS Street E91 Touring xDrive Inox is made for the xDrive (four-wheel-drive) versions. MTS Technik has separate kits for rear-wheel drive.
What is the difference between Comfort, Street and Stance?
All versions use the same dampers; the difference lies in the Eibach springs and the lowering range: Comfort (24-47.5 and 100 N/mm), Street (60 and 100 N/mm) and Stance (70 and 120 N/mm). Comfort is the softest. Street is the standard. Stance is the firmest and the lowest.
What is the difference between Gold and Inox?
Gold has steel damper bodies with a yellow zinc coating, Inox has stainless steel damper bodies. Inox is more resistant to road salt and moisture and therefore costs more. Otherwise, the kits are identical.
How long does delivery take?
The MTS Street E91 Touring xDrive Inox is delivered within 4 to 7 working days as long as the manufacturer has stock.
Other MTS Technik sets for the E91 Touring xDrive
Delivery outside the European Union: different shipping costs may apply. Don’t worry: we will email you as soon as possible after your order and agree the shipping with you. You are not committed to anything without your consent.
EN
NL
FR
DE
Reviews
There are no reviews yet.